FS:: Tarrett rear anti-sway bar.
Joined: Jun 2006
Posts: 354
Likes: 0
From: Westchester, California
Tarrett rear anti-sway bar.
Category: Suspension
Price: $300
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R53
Location (Region): SoCal
Item Condition: Used
PayPal or cash only. Local sale only cause I don't want to find a box for the bar.
mr.sterlingsmith (at) gmail (dot) com or PM me.
I have this bar on my GP and it is ausume! Are you confused wether you should be using a 19mm, 20mm, or 22mm dia? This bar is completly adjustable and will cover all your needs as you continue to modify your suspension with different spring rates, shock/struts, tires, ect. How many times have you read posts where someone started with one size and made other changes to their suspension that required them to change the bar a second time.
Install of this bar is super easy if you cut out the old stock bar and does not require lowering of the rear subframe (replacement of stock bar can be found pretty cheap in the market place if needed). This also means that you would not require an alignment.
One other benefit is it comes with adjustable rear endlinks so you can eliminate any preload on the bar.
Flingger
As far a shipping goes I have a tip for you. Go to a hardware store and get yourself a piece of foam pipe wrap that is long enough to cover the bar, tape over it and it will ship fine. The rest of the parts will fit in a small box.
Steve
Install of this bar is super easy if you cut out the old stock bar and does not require lowering of the rear subframe (replacement of stock bar can be found pretty cheap in the market place if needed). This also means that you would not require an alignment.
One other benefit is it comes with adjustable rear endlinks so you can eliminate any preload on the bar.
Flingger
As far a shipping goes I have a tip for you. Go to a hardware store and get yourself a piece of foam pipe wrap that is long enough to cover the bar, tape over it and it will ship fine. The rest of the parts will fit in a small box.
Steve
Joined: Jun 2006
Posts: 354
Likes: 0
From: Westchester, California
NintenTom...it's hollow. I can only imagine how heavy it would be at 1" (25.4mm) in diameter. Tarrett's primary customer base is the Porsche racing crowd. The stuff is damn pretty too.
Thanks for the tip Steve.
Thanks for the tip Steve.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
iwant2knowwhois
1st Gen Countryman (R60) Talk (2010-2015)
11
Sep 19, 2015 12:18 PM




