A Big Thanks
No. Its not fair to you to have me take your bar and have you wait for a long time for a replacement. I don't want to make you go through that after you were kind enough to give me the bar.
Originally Posted by SRTech
I told you I was willing to wait.
I am not in a hurry. I've had parts for six months before I installed them.
My living room is now partless; now for the bedroom.
Steve
I am not in a hurry. I've had parts for six months before I installed them. My living room is now partless; now for the bedroom.Steve
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Hey, willum (William), your dipstick should be here on Friday. Hopefully, California won't have washed into the Pacific by then. If you're down my way, you can get it installed.
Steve
Steve
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Originally Posted by 1nf3rn0
No. Its not fair to you to have me take your bar and have you wait for a long time for a replacement. I don't want to make you go through that after you were kind enough to give me the bar.
Also our local Mini mod parts store "Steve's Mini Mod Parts"
5th Gear
Joined: Jan 2005
Posts: 764
Likes: 0
From: Modesto, Calif.
Originally Posted by SRTech
Hey, willum (William), your dipstick should be here on Friday. Hopefully, California won't have washed into the Pacific by then. If you're down my way, you can get it installed.
Steve
Steve
If you take 132 through MoTown, maybe we can do the $$ to parts swap as you fly thru or maybe I need an excuse to come down your way to help supervise the mod installs
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by willum
Hey, thanks. Won't be this weekend, but we will hookup along the way. I know its a tough install but I'm going to give it a stab myself. If you take 132 through MoTown, maybe we can do the $$ to parts swap as you fly thru or maybe I need an excuse to come down your way to help supervise the mod installs
If you take 132 through MoTown, maybe we can do the $$ to parts swap as you fly thru or maybe I need an excuse to come down your way to help supervise the mod installs You can drink beer and supervise. Oh, and install your dipstick.Steve
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by Scooby03
Hey, if Weber is going to become a local Mini dealer, we could open up our own Mod Shop.
Now, if Weber creates a need for a repair shop, we would need to be in Fresno.Steve
5th Gear
Joined: Jan 2005
Posts: 764
Likes: 0
From: Modesto, Calif.
Originally Posted by SRTech
I usually drive through Modesto about 2:00 PM on Friday and 10:00 AM on Monday. There's no hurry. You could come down on the 22nd of this month for our M7-USS install day. If they all get here by then, we will have three to put on. You can drink beer and supervise. Oh, and install your dipstick.
Steve
You can drink beer and supervise. Oh, and install your dipstick.Steve
Maybe the sky's will dry out by then....
Directions??
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by willum
Pencil me in for the 22nd. What kind of beer?? other than "cold 'n wet"
Maybe the sky's will dry out by then....
Directions??
Maybe the sky's will dry out by then....
Directions??
Hopefully, you don't like swill (Bud, Coors, MGD, etc.). If it keeps raining the way it is, I'll have beach front property so you can come by boat. I think you can find Oakhurst so if you are coming down Hwy. 49 turn left at the stoplight when it ends at Hwy. 41. Turn right on Road 426 at the next light and drive 3.25 miles. Turn right onto Bon Veu Dr. and turn down the third driveway on the right. The address is 51090 Bon Veu Dr.Steve
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
I went and talked to Dave a bit ago. He will align our cars on a Saturday. Just need to give him a little notice.
I think he is going to make our next meeting, that way we can talk to him more.
I was able to work today. Went later than normal, but got finished.
I think he is going to make our next meeting, that way we can talk to him more.
I was able to work today. Went later than normal, but got finished.
5th Gear
Joined: Jan 2005
Posts: 764
Likes: 0
From: Modesto, Calif.
Originally Posted by SRTech
I always have Sierra Nevada Pale Ale so if you don't like that you can bring something else. Hopefully, you don't like swill (Bud, Coors, MGD, etc.). If it keeps raining the way it is, I'll have beach front property so you can come by boat. I think you can find Oakhurst so if you are coming down Hwy. 49 turn left at the stoplight when it ends at Hwy. 41. Turn right on Road 426 at the next light and drive 3.25 miles. Turn right onto Bon Veu Dr. and turn down the third driveway on the right. The address is 51090 Bon Veu Dr.
Steve
Hopefully, you don't like swill (Bud, Coors, MGD, etc.). If it keeps raining the way it is, I'll have beach front property so you can come by boat. I think you can find Oakhurst so if you are coming down Hwy. 49 turn left at the stoplight when it ends at Hwy. 41. Turn right on Road 426 at the next light and drive 3.25 miles. Turn right onto Bon Veu Dr. and turn down the third driveway on the right. The address is 51090 Bon Veu Dr.Steve
5th Gear
Joined: Jan 2005
Posts: 764
Likes: 0
From: Modesto, Calif.
Beer and donuts....yummmm. I got confused ...the 23rd is the NorCal Pinnacles run...the REME Santa Cruz run is on the 6th of May. WAY Too many options....but Norm seems to have a handle on keeping the calender straight. Gotta go have a glass of wine....helps lubricate the knee joints after installing baseboards etc....1.5 rooms down, 3 to go...
...the 23rd is the NorCal Pinnacles run...the REME Santa Cruz run is on the 6th of May. WAY Too many options....but Norm seems to have a handle on keeping the calender straight. Gotta go have a glass of wine....helps lubricate the knee joints after installing baseboards etc....1.5 rooms down, 3 to go...
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by willum
Got the PM...thanks....I like the micro brews and SNPA is on of my favorites. Will bring plenty......where do you connect up with 49 from 99? And water wings will be optional depending on the weather.
Steve
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by Scooby03
Hey Tech, I talked to Michele today, how long to install her gas cap? Any idea? I told her I would find out.
Steve
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Originally Posted by SRTech
I haven't looked at the manual, but I can't believe it could take even an hour. I'll look on Saturday just to be sure.
Steve
Steve