When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a complete rear seat delete for a 2 door F56 hardtop. I purchased it through a UK company. They basically sourced interior fabric to match the OEM fabric and attached it to pieces of plywood.
There are two pieces. One takes the place of where your seats would normally mount. This one fits really well. It is covered in the same material as the OEM seat back. The other piece sits at the rear
and makes the rear cargo area flush with the front piece. It is covered in the same material as the rear cargo area. This piece has a slight bow to it, but fits fine.
I'm not sure why they didn't do both in the same material, but at least they're the same color as each other.
I ordered this without the hole for the seat bracket, which means you'll need to remove the seat bracket in order for this to work. It's welded in, not very well in my case, and was easy to pop out. The bracket was easy to replace when I put the seats back in, just a couple of spot welds so easily reversible. Could even bolt it back in if desired.
It's in excellent condition, never any smoke, food or animals in the car.
Local pickup only, the box this came in was huge.
Last edited by LannyMCS; May 19, 2023 at 10:13 AM.
The cargo section is 38" x 18-1/2". The seat section is 24" x 48" (at the widest point, closest to the front of the car). Here's a picture of the underside of the seat section.
On my 2021 2 door hatch the bracket was welded to the support bar with 4 small spot welds. I just hit the spot welds with a drill bit, I'm guessing here but around 1/4" bit. Honestly, the welds came out a little too easy for my liking; I was expecting a little more work to get it off.