2005 Mini Cooper s John Cooper Works
#1
#5
Hi chrisoakes,
Very nice clean looking 05 MCS JCW
Does it have the dealer added limitted slip diff?
You can find out with a Vin check possibly
Just punch in the last seven of your vin.
http://bimmer.work/
Very nice clean looking 05 MCS JCW
Does it have the dealer added limitted slip diff?
You can find out with a Vin check possibly
Just punch in the last seven of your vin.
http://bimmer.work/
#6
Are they these? https://orranje.co.uk/product/orciar...ts-r50-r52-r53
Wonder how much extra airflow that pics to force into the airbox?
Wonder how much extra airflow that pics to force into the airbox?
#7
Are they these? https://orranje.co.uk/product/orciar...ts-r50-r52-r53
Wonder how much extra airflow that pics to force into the airbox?
Wonder how much extra airflow that pics to force into the airbox?
Last edited by pnwR53S; 11-12-2017 at 04:44 PM. Reason: corrected spelling
Trending Topics
#8
Before I got crucified for saying it, I think compared to the air pressure in the cockpit the pressure there is higher. It is just a lowest pressure area of the air passing thru the bonnet , over the windscreen and up over the roof. Otherwise the fan and air conditioning fan would not work at Mach speed of our Minis.
#13
Car came very well-equipped with factory LSD and full JCW suspension and brakes
I’ve just installed a single mass Valeo clutch kit, rebuild power steering, PowerFlex bushings, Ignition, updated airbox filter, Cabrio Strut brace, Madness lower brace, 22 mm rear sway
I’ve done a ton of service for including supercharger, etc
#14
#15
No steering issues… Did replace the rack bushings and new power steering lines as well as serviced the power steering pump… I’m fortunate to have a well-equipped home garage with the hoist and all the goodiesDrive the car only in summer months And spend the winter doing projects… This winter I’m installing braided steel brake lines and servicing brakes..As well as some chilli red mirror caps
#16
awesome!! looks really good. What about the engine sway since its a transversally mounted engine. I find at low speeds letting off the throttle i feel it. I know it as a dog bone but is has a different name on minis. I heard the factory one wears out. Have you put in a more solid engine brace?
#21
chrisoakes if you need those lenses resurfaced let me know.
for all yah Ontario residents, join us at Southern Ontario Mini club (and various more localized groups). We're very active on FB
www.facebook.com/groups/somcclub/
...and get out to my hanger for an event or two...
for all yah Ontario residents, join us at Southern Ontario Mini club (and various more localized groups). We're very active on FB
www.facebook.com/groups/somcclub/
...and get out to my hanger for an event or two...