Interior/Exterior Interior and exterior modifications for Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Interior/Exterior Re-applying COOPER S letters

Thread Tools
 
Search this Thread
 
Old Oct 24, 2006 | 02:03 AM
  #1  
afnos's Avatar
afnos
Thread Starter
|
2nd Gear
Joined: Aug 2006
Posts: 68
Likes: 0
From: Cheyenne, WY
Re-applying COOPER S letters

I recently had the car repainted BRG/B(Got a great deal on the car... had to sacrifice getting the LY/W). The cheap way out... yeah, I know, but what's done is done. The folks (pretty sure they used the "southwest non-taxed laborers" if you know what I mean) at the shop didn't bother to tape over the letters on the hatch or even study them for a second to aid in re-applying them. Now I'm ashamed to drive around much longer in an otherwise beautiful vehicle with the letters all jacked up.
I'd like to take them off and put them back on in their original positions but I don't know what to use for adhesive.
Does anybody know how much new letters w/adhesive backing cost at the dealership?
 
Reply
Old Oct 24, 2006 | 03:23 AM
  #2  
davavd's Avatar
davavd
6th Gear
iTrader: (2)
Joined: Sep 2006
Posts: 1,506
Likes: 1
From: Covington, Louisiana
If you order after-market boot stripes, I think you get a new badge with them. Why did you repaint? How about some pics? Before & after would really be cool.
 
Reply
Old Oct 24, 2006 | 04:15 AM
  #3  
polizei's Avatar
polizei
6th Gear
Joined: Feb 2006
Posts: 2,398
Likes: 0
From: Cincinnati, Ohio
Talk to your dealer, they should have some. If not, I KNOW you can find them somewhere else....I personally just don't know where.

-Cody
 
Reply
Old Oct 24, 2006 | 07:31 AM
  #4  
qwertmonkey's Avatar
qwertmonkey
6th Gear
Joined: Mar 2006
Posts: 2,619
Likes: 1
From: A street address or space indexing system.
I'm pretty sure CooperFlags has a replacement.

www.cooperflags.com
 
Reply
Old Oct 24, 2006 | 09:48 AM
  #5  
rare1's Avatar
rare1
2nd Gear
Joined: Aug 2006
Posts: 79
Likes: 0
From: From Northern NJ to Southern CA, now down in Dixie!
I just went to the dealership to purchase an additional "S" to put on the intercooler tray. It turns out that you have to purchase the "S" along with the "Cooper".

Part# 51-14-7-026-182

Probably cheaper going the aftermarket route.
 
Reply
Old Oct 24, 2006 | 11:23 AM
  #6  
Rally@StanceDesign's Avatar
Rally@StanceDesign
Former Vendor
Joined: Jan 2004
Posts: 8,337
Likes: 8
From: oh10
any pics of your repainted car?
 
Reply
Old Oct 24, 2006 | 01:49 PM
  #7  
afnos's Avatar
afnos
Thread Starter
|
2nd Gear
Joined: Aug 2006
Posts: 68
Likes: 0
From: Cheyenne, WY
The intermittent rain lately combined w/a dusty emnironment makes for bad car pics. Leaving for a trip to NY tomorrow so a wash and wax isn't on my priority list, but when I get a chance I will post some in my gallery.
 
Reply
Old Oct 24, 2006 | 01:59 PM
  #8  
mini-rolls's Avatar
mini-rolls
Former Vendor
Joined: Dec 2002
Posts: 1,026
Likes: 0
From: Olympia, WA
The letters are held on with 3m body tape. It comes in grey or white in various widths. You can it wide enough to place on the entire back of the letter and the trim the excess away with a sharp razor blade.
 
Reply
Old Oct 24, 2006 | 04:08 PM
  #9  
afnos's Avatar
afnos
Thread Starter
|
2nd Gear
Joined: Aug 2006
Posts: 68
Likes: 0
From: Cheyenne, WY
Originally Posted by mini-rolls
The letters are held on with 3m body tape. It comes in grey or white in various widths. You can it wide enough to place on the entire back of the letter and the trim the excess away with a sharp razor blade.
Thank you. That's exactly what I was looking for.
 
Reply
Old Oct 24, 2006 | 06:46 PM
  #10  
ProfessorDave's Avatar
ProfessorDave
6th Gear
Joined: Oct 2005
Posts: 3,637
Likes: 0
From: Clarks Summit, PA
This is exactly what I did to reapply the original cooper letters after my boot strip install (which I've done since the picture in my sig was taken, so you won't see it there). It works great...just a little tedious trimming away the excess tape.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
surfblue
Navigation & Audio
4
Oct 24, 2018 01:20 AM
Emnotek
Vendor Announcements
0
Aug 13, 2015 05:47 PM
ECSTuning
Vendor Announcements
0
Aug 12, 2015 01:24 PM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM
PelicanParts.com
Vendor Announcements
0
Aug 4, 2015 02:45 PM




All times are GMT -7. The time now is 10:54 PM.