Interior/Exterior Roof Banner, Easy?
Roof Banner, Easy?
Alright you guys, im thinking of changing my cars look. Spending around a $1k or so, gonna get the checkered mirrors, checkered Bonnet and Boot stripes, prolly something else for the side pannel and then the Checkered Roof!
My question is this, how easy is the install? Me and my dad did my Bonnet and side stripes ourselves. Fairly straightforward but roof seems :impatient :impatient
My question is this, how easy is the install? Me and my dad did my Bonnet and side stripes ourselves. Fairly straightforward but roof seems :impatient :impatient
I did my roof graphic and found it was difficult to avoid folds and bubbles. There is a good set of instructions in an issue of MC2 magazine. Read those first, take your time and you should be able to do a decent install.
Originally Posted by MCLeonard
I did my roof graphic and found it was difficult to avoid folds and bubbles. There is a good set of instructions in an issue of MC2 magazine. Read those first, take your time and you should be able to do a decent install.
Originally Posted by thefuturequeenofnebraska
Check out Cooper Flags... They do the best stuff 
AND.. Good luck! You have a BIG task ahead of you!

AND.. Good luck! You have a BIG task ahead of you!
Originally Posted by illegalprelude
any idea how I can get my hands on that article?
http://www.mc2magazine.com/Files/Iss...DIYSunroof.pdf
Originally Posted by MCLeonard
Trending Topics
With two people it isn't tooo bad, just take your time use lots of Windex so you can move them then squeegee the pieces, we marked the roof in pencil with the checker board all together in the three pieces it came in, that helped.
We never did get the front corners to round with the roof so we cut the front squares so they didnt have to round the corner and go all the way to the edge.
Check my gallery it didnt turn out half bad, though sometimes I see a corner peeling, little glue and the corner is fixed. GOOD LUCK!
We never did get the front corners to round with the roof so we cut the front squares so they didnt have to round the corner and go all the way to the edge.
Check my gallery it didnt turn out half bad, though sometimes I see a corner peeling, little glue and the corner is fixed. GOOD LUCK!
Thread
Thread Starter
Forum
Replies
Last Post
patsum
R50/R53 :: Hatch Talk (2002-2006)
26
May 29, 2021 06:29 PM
PelicanParts.com
Tires, Wheels & Brakes
0
Sep 3, 2015 03:22 PM



