Interior/Exterior Project Aero Wing 2
Originally Posted by JS
I can safely say "The Areo Wing" looks nothing like that.
That looks, to me, like someone added CF and vortex generators to a Cooper spoiler.
That looks, to me, like someone added CF and vortex generators to a Cooper spoiler.
Former Vendor
Joined: Jan 2004
Posts: 8,337
Likes: 8
From: oh10
Originally Posted by JS
I can safely say "The Areo Wing" looks nothing like that.
That looks, to me, like someone added CF and vortex generators to a Cooper spoiler.
That looks, to me, like someone added CF and vortex generators to a Cooper spoiler.
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Originally Posted by racinbmw
Ok so anyone know what the status is on this. I am eager to get a wing just like the GP wing but heck $800+ is a lot form oevrseas. Any news?
5th Gear
Joined: Aug 2004
Posts: 1,079
Likes: 1
From: AZ
Originally Posted by JS
Might have a few teaser photos up on this thread, just before we head off to the Dragon. For those of you who will not make that event. I have a few minor things to do before photo's are to debut.
JS
JS
:thumbsu p:
Originally Posted by defylogik
5 pages and no pictures.. wtf yo!
I want one
It is nearly done just a little more to do it(according to JS/Msfitoy) Sorry no Photo's I have been sworn to secrecy
3rd Gear
Joined: Aug 2005
Posts: 261
Likes: 0
From: Bay Area, CA
Originally Posted by TheWrks
Got a good look at it yesterday.. All i can say OMGG
I want one It is nearly done just a little more to do it(according to JS/Msfitoy)
Sorry no Photo's I have been sworn to secrecy
I want one
It is nearly done just a little more to do it(according to JS/Msfitoy) Sorry no Photo's I have been sworn to secrecy
I understand the need for not wanting to reveal until it is completley done, however this is nto what you did with the Ram intake and look how much response you got from that. Is there anyway that you can just show us what it looks like so far. We understand that there is still work that needs to be done but would like to at least have a visual understanding of what this will look like or how it will function.
Thanks
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Funny you guys brought this up...I was just outside with Joel making a template for the wicker-bill. We ran into some unexpected warping and last minute surface tuning but it now looks SIK
It's mounted on his MINI but I don't think Joel wants to reveal it until the wicker-bill in on the wing...sorry...
As for what it looks like, there's no mystery...as I mentioned in the first post, it is very similar to the Mini Aero wing (the one without the hole like I have) but has more attitude and extends further back nearly two inches. The back edge is flat to which an adjustable wicker-bill is mounted with 5-7 bolts. This wicker-bill is designed to be replaced with different sizes that extend lower or higher into the air stream depending on the down force required...
It's mounted on his MINI but I don't think Joel wants to reveal it until the wicker-bill in on the wing...sorry...As for what it looks like, there's no mystery...as I mentioned in the first post, it is very similar to the Mini Aero wing (the one without the hole like I have) but has more attitude and extends further back nearly two inches. The back edge is flat to which an adjustable wicker-bill is mounted with 5-7 bolts. This wicker-bill is designed to be replaced with different sizes that extend lower or higher into the air stream depending on the down force required...
5th Gear
Joined: Nov 2003
Posts: 1,027
Likes: 0
From: Miami, Fl
Originally Posted by MSFITOY
This is going to be great for your application...and it looked awesome on JS's Peper White/black wheels MCS so stay tuned for his pictures
Though i do have $300 left to spend on the car.... ahhhh decisions.
