Interior/Exterior Dummy Toggle Switches
Jim
These are the factory switches that function but just don't operate anything.The blanks in the empty spaces pop out.As far as dummy switches I don't know anyone who currently makes those yet.Here's the diagram.
http://www.realoem.com/bmw/showparts...45&hg=64&fg=20
http://www.realoem.com/bmw/showparts...45&hg=64&fg=20
These are the factory switches that function but just don't operate anything.The blanks in the empty spaces pop out.As far as dummy switches I don't know anyone who currently makes those yet.Here's the diagram.
http://www.realoem.com/bmw/showparts...45&hg=64&fg=20
http://www.realoem.com/bmw/showparts...45&hg=64&fg=20
Jim
$8.00 from Pelican Parts.
http://www.pelicanparts.com/cgi-bin/...I1.x=15&I1.y=6
Please post a how-to on the install when you get it done.
http://www.pelicanparts.com/cgi-bin/...I1.x=15&I1.y=6
Please post a how-to on the install when you get it done.
I've been thinking of doing something with the blank switches as well. Looking at the realoem.com diagram and the related listing below it, I notice it shows the number 5. Does that mean five are needed of that part or if you order the part number through Pelican you get 5 total?
Trending Topics
I do not know of any "dummy" switches that can just be stuck on.
As for the OEM toggle part it is readily available. as stated in posts above. If installed many time they car actually operate the function that they were intended to by having the dealer program the switch. I.E. Fog lights. The wiring and the bulbs are in my Clubman but the only part that is missing is the toggle (andthe toggle cover would neet to be changed to indicate the fog light symbol as it is not there on the current cover plastic)
Putting them in is another story. Here is a link to a thread that has instructions on how to put them in the lower center console area. There are a lot of parts that have to be taken off to get to them to install.
https://www.northamericanmotoring.co...d.php?t=125800
Switches on the roof console are much easier to put in. If no sun roof then a toggle can be added. it just will not work for anything.
As for the OEM toggle part it is readily available. as stated in posts above. If installed many time they car actually operate the function that they were intended to by having the dealer program the switch. I.E. Fog lights. The wiring and the bulbs are in my Clubman but the only part that is missing is the toggle (andthe toggle cover would neet to be changed to indicate the fog light symbol as it is not there on the current cover plastic)
Putting them in is another story. Here is a link to a thread that has instructions on how to put them in the lower center console area. There are a lot of parts that have to be taken off to get to them to install.
https://www.northamericanmotoring.co...d.php?t=125800
Switches on the roof console are much easier to put in. If no sun roof then a toggle can be added. it just will not work for anything.
Jim
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Interior/Exterior Products
0
Oct 1, 2015 12:34 PM
ECSTuning
Vendor Classifieds
0
Oct 1, 2015 12:34 PM
ECSTuning
Interior/Exterior Products
0
Oct 1, 2015 12:28 PM
ECSTuning
Vendor Classifieds
0
Oct 1, 2015 12:28 PM
ECSTuning
Vendor Announcements
0
Oct 1, 2015 12:13 PM




