Interior/Exterior Interior and exterior modifications for Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Interior/Exterior Joining the DIY splitter club...

Thread Tools
 
Search this Thread
 
Old Jul 29, 2008 | 05:26 PM
  #101  
ngweibing's Avatar
ngweibing
6th Gear
iTrader: (11)
Joined: May 2008
Posts: 4,070
Likes: 1
From: pittsburgh( southside), PA
this is the one i am having problem.... car never lowered and i did look at taking out the lower bumper but still cant get it off after removing few screws...


Originally Posted by emsjr
I'm not sure what type of splitter you have, or if your car is lowered, however, I did my entire project without even jacking up the car. Remove the bumper cover (Very Easy) and the rest should be a breeze. PM if you have any other questions or just post here. Mine is doing fine, but I do not track the car, nor is it lowered, so that does help.

Gene
 
Reply
Old Jul 29, 2008 | 05:48 PM
  #102  
emsjr's Avatar
emsjr
Thread Starter
|
3rd Gear
Joined: Jul 2006
Posts: 266
Likes: 0
From: Northern Baltimore County
Keep looking

Do some searches on front cover removal, you must be missing some, because once the two by the front wheel arches are removed, the lower ones under the car that hold the lower lip on, the two on top plus the little tabs that snap it in place along the front by the radiators, it just about falls off. Just make sure you unhook the lights and the temp sensor. There are many articles on this so re-read them and make sure all the screws are undone.

Gene
 
Reply
Old Aug 2, 2008 | 03:03 PM
  #103  
ngweibing's Avatar
ngweibing
6th Gear
iTrader: (11)
Joined: May 2008
Posts: 4,070
Likes: 1
From: pittsburgh( southside), PA
i finally managed ot put the front splitter... what ya think?

my pics are in my gallery...it does not allow me to post same pics. anyone know why?
 
Reply
Old Aug 2, 2008 | 05:12 PM
  #104  
emsjr's Avatar
emsjr
Thread Starter
|
3rd Gear
Joined: Jul 2006
Posts: 266
Likes: 0
From: Northern Baltimore County
Looks good

Just curious, what was the hang-up on getting the bumper cover off. It looks good! Hope it's what you hoped for.

Gene
 
Reply
Old Aug 2, 2008 | 05:26 PM
  #105  
ngweibing's Avatar
ngweibing
6th Gear
iTrader: (11)
Joined: May 2008
Posts: 4,070
Likes: 1
From: pittsburgh( southside), PA
a fellow MINI help me alot...its a pain in the butt to get bumper off and on espically screwing back u lied on the floor and the screw keep dropping out after u put it in...

i am still getting used to the look..i am more worried abt road bumps though i never lowered my car..

Originally Posted by emsjr
Just curious, what was the hang-up on getting the bumper cover off. It looks good! Hope it's what you hoped for.

Gene
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ccfirelt
General MINI Talk
8
Oct 18, 2015 01:02 PM
eMINI of the State
1st Gear
3
Oct 2, 2015 03:12 PM
M7Speed
R56 :: Hatch Talk (2007+)
0
Oct 1, 2015 07:05 AM
pkillur
1st Gear
3
Sep 30, 2015 10:51 AM




All times are GMT -7. The time now is 10:19 AM.