aFe 77-46319 - SCORCHER GT Module
aFe 77-46319 - SCORCHER GT Module
Hi,
Anybody tried one of these aFe 77-46319 - SCORCHER GT Module in line chips from aFe?
https://afepower.com/afe-power-77-46319-scorcher-gt-module
Be interested in hearing any reviews / thoughts.
SG
Anybody tried one of these aFe 77-46319 - SCORCHER GT Module in line chips from aFe?
https://afepower.com/afe-power-77-46319-scorcher-gt-module
Be interested in hearing any reviews / thoughts.
SG
Not much reviews on that unit. Unless someone else has info. Most people have gone the NM route: https://www.northamericanmotoring.co...r-the-n18.html
some reviews on the NM unit, if you want to keep that as an option. Just saw your other post and looks like you already was looking at that?
some reviews on the NM unit, if you want to keep that as an option. Just saw your other post and looks like you already was looking at that?
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Hi, Thanks for the response, I can get the aFe locally (Toronto) hence my interest, been speaking with aFe their numbers are based on regular gas, have asked for a dyno using a racing type fuel (I can get Ultra 94 locally), will post if they provide.
The dyno should be the same on all N18 engines unless its a JCW N18. The only thing that would differ in the ALL4 is the driveline power loss for wheel horsepower vs the 2 wheel drive cars.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
They only have dyno for 2.0 cars.
What puts me off is that the control unit is hard wired to the module, I asked aFe if it could be set at whatever power level (4 to choose from) you wanted then removed, but no, it can't be set and removed.
What puts me off is that the control unit is hard wired to the module, I asked aFe if it could be set at whatever power level (4 to choose from) you wanted then removed, but no, it can't be set and removed.
Thread
Thread Starter
Forum
Replies
Last Post







