Dang Drivers Door
Dang Drivers Door
Hi All, Just purchased a 2008 mini cooper, had it for a few days now, got aboard this morning and the drivers door won't close! Tried it a few times with no luck, but it does close from the outside?? Go figure, any ideas? Thanks
Did you check the door lock in the jam, it is suppose to open when triggered all the way. Then when you close it latches shut. Might be jammed ( spray it ) or broken, which is you need replaced.
#1 in the diagram.

Do you have an 2008 MINI Convertible ( Gen 1 ) or a 2008 R56 Hardtop ( Gen 2) ( newer body style ) ?
Gen 1 MINIs door locks. R50 R52 R53
Door Lock Unit - Left ( driver side ) 51200556768
http://www.ecstuning.com/Search/SiteSearch/51200556768/

---------------------------------
---------------------------------

Gen 2 MINIs Door locks , R56+ 51212752595 Driver side front door.
http://www.ecstuning.com/Search/SiteSearch/51212752595/
Thanks
#1 in the diagram.

Do you have an 2008 MINI Convertible ( Gen 1 ) or a 2008 R56 Hardtop ( Gen 2) ( newer body style ) ?
Gen 1 MINIs door locks. R50 R52 R53
Door Lock Unit - Left ( driver side ) 51200556768
http://www.ecstuning.com/Search/SiteSearch/51200556768/

---------------------------------
---------------------------------

Gen 2 MINIs Door locks , R56+ 51212752595 Driver side front door.
http://www.ecstuning.com/Search/SiteSearch/51212752595/
Thanks
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
You are welcome. Then Follow the R56 part above and inspect the lock #1.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Doesn't appear to be anything broken, it shuts fine from the outside but not when your sitting in it??
Trending Topics
Could be still the lock or the cable. The cables and snap or stretch. The lock can break on the inside where the cable pulls the actuator. This cable connects from the inside handle to the lock. When pulled moves the door lock and then opens. is the handle/ cable is fine. then its the lock itself.

#9 Bowden Cable For Door Opener
http://www.ecstuning.com/Search/SiteSearch/51212754525/

Thanks

#9 Bowden Cable For Door Opener
http://www.ecstuning.com/Search/SiteSearch/51212754525/

Thanks
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
David Eric Rosenberg
R57 :: Cabrio Talk (2009+)
3
Sep 10, 2015 12:34 PM







