OK does ANYONE have this? If so please ,post some pics. I'm thinking of getting it for my TG JCW.. not to sure what color yet, but i'm leaning to black or trans Mat.

 

For the F56 3 Door . Pics below are the 5 door. But the same general set up.



On the F56 :



#4 51142355196

http://www.ecstuning.com/Search/SiteSearch/51142355196/

&

#5 51142365019

http://www.ecstuning.com/Search/SiteSearch/51142365019/


&

#6 51142365018

http://www.ecstuning.com/Search/SiteSearch/51142365018/

 

would you say its to tacky or would look good?

 

Maybe paint the car up like a bottle of catsup? Oh, sorry that's 57 not 37. Seriously I saw the first F56 I've seen in Prescott, AZ, recently. It had a bonnet stripe with a number in it (maybe 37) and looked good. I can't remember if it had side stripes/numbers though. It was definitely not what we see here though, which looks a little rough to me on most of them. The red car is the best IMO.

 

The graphics look a little translucent, so you can see the body color underneath, the etk pictures don't show it too well.

 

I wonder if anyone has it yet on their F56 yet

 

Honest opinion? Tacky for a street car.

 

Here the one set: F56 Dont look too bad on the F56 with JCW pro stuff

 

I contemplated so many graphic options including JCW stripes but in the end designed this and LOVE it

 

I really like the JCW Pro Side stripe and number and wanted it when I got my F56 at the end of the year but they were not available. So I went with the JCW Pro accessories and roof decal which I LOVE. And came up with an alternative side strip and number.

 

As long as you like it, that's all that matters.. For me my concern with going with a factory layout like that is you will see other with the exact same thing. I'd change it up some to be different... Atleast alittle here or there..

 

I have not seen many with thst graphics at the dealerships. So in all pretty rare.

 

I 100% agree. The OEM stripes are usually more expensive and so most folks design their own or go aftermarket. I have yet to see (other than somewhere on line) another MINI with my JCW Pro roof decal/layout and other MINI owners comment on it all the time when they see it. In addition, the side decal (#37 and checks over the rear quarter) are even rarer as they were production delayed from the factory initially, Europe only after that and only recently released here.

But all in all, you should do what you feel represents you!

 

Granted I haven't seen an F56 with the checkers and number/circle ( still very early in the model run though ) but plenty of other models out there with stuff like that, not an exact match but.... I'm just thinking rotate the checkers one way or the other, and or slide them further frontwards or back, maybe move the circle front and lower just to put your own twist to it.. just my opinion since you asked.. If the dealer is applying them you have options...

 

You could definitely play with the placement of the #37/circle, but the side checkers are pre-cut to hug the rear wheel arch. Moving those or rotating them would require a bit more alteration and may not even be possible or worth it, given what they cost.

 

Yea, you could move the #37 around a bit. Based off photos above.

 

Maybe add a few checks to the rear of it so it runs down the arch as well.. For me I'd wanted to make it different some how..

 

Sorry for bringing this thread back to life! I am looking to purchase those racing decals but I want them to be white, mini USA only sell them in black and gray :( Any idea where could I find them in white?

 

Hope this helps.

 

Thanks, I found a guy on eBay that that is custom making me the same decals but in white

 

Nice, post up when you get them on, MINI only has them in certain colors. They do have a transparent matte finish. #4

http://www.realoem.com/bmw/enUS/show...diagId=03_1639

 

Will do