Electrical For discussions regarding wiring up electrical modifications such as radar detectors, brake light mods, power sockets, and driving lights in Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Electrical OEM dealer installed Driving lights. Can I put on PIAAs with no problems? X-post

Thread Tools
 
Search this Thread
 
Old Feb 8, 2007 | 08:28 AM
  #1  
WannaMini_'s Avatar
WannaMini_
Thread Starter
|
6th Gear
Joined: Apr 2004
Posts: 1,585
Likes: 0
From: USA
OEM dealer installed Driving lights. Can I put on PIAAs with no problems? X-post

OEM dealer installed Driving lights. Can I put on PIAAs with no problems?
Same as exterior mods...

One of my dealer-installed driving lights took a shot from a rock chip and broke. The dealer wanted an insane amount of money to replace it. I could get two brand new ones from PIAA for that price.

So my question is - is the wiring setup for the OEM lights compatible with PIAA lights? I can't see why it wouldn't be, but you never know.

Will I have to replace the brackets? Do I need to buy a full kit, or does PIAA sell just the lights themselves sans wiring and brackets?

Thanks so much and I apologize if these are really stupid questions.
 
Reply
Old Feb 8, 2007 | 08:39 AM
  #2  
planeguy's Avatar
planeguy
6th Gear
Joined: Sep 2003
Posts: 1,443
Likes: 0
From: Wichita, Kansas
no problems. Just make sure your wattage is the same (55W...if i recall correctly)
 
Reply
Old Feb 8, 2007 | 03:06 PM
  #3  
chows4us's Avatar
chows4us
6th Gear
Joined: May 2005
Posts: 15,478
Likes: 2
Originally Posted by WannaMini_


Will I have to replace the brackets? Do I need to buy a full kit, or does PIAA sell just the lights themselves sans wiring and brackets?
Go here http://www.piaa.com

Decide on which PIAAs you want. Get the part numbers

Then google for the best price!

You might want to look at http://www.hellausa.com though. Hella is top quality. PIAA ... so so but that is an opinion.
 
Reply
Old Feb 9, 2007 | 06:52 AM
  #4  
WannaMini_'s Avatar
WannaMini_
Thread Starter
|
6th Gear
Joined: Apr 2004
Posts: 1,585
Likes: 0
From: USA
Here they are. I like the Hella ones, but all the ones that I've seen are just a little large for my taste...

http://www.ltbmotorsports.com/micocos02.html

 
Reply
Old Feb 9, 2007 | 06:55 AM
  #5  
BSUCardinalfan's Avatar
BSUCardinalfan
5th Gear
iTrader: (1)
Joined: May 2003
Posts: 991
Likes: 4
From: Atlanta
those are the size I want. Can you get them with chrome instead of black housings, and run them without the mesh?
 
Reply
Old Feb 9, 2007 | 07:09 AM
  #6  
npartist's Avatar
npartist
4th Gear
Joined: Aug 2002
Posts: 352
Likes: 1
From: Farmington Hills, MI
Wait, you said a rock broke the bulb or the entire light/housing unit? Cause the lens/bulb is one peice and you should just be able to buy a new bulb for farily cheap anywhere online. I am not sure what the P/N is though, check the back of the bulb.
 
Reply
Old Feb 9, 2007 | 07:14 AM
  #7  
WannaMini_'s Avatar
WannaMini_
Thread Starter
|
6th Gear
Joined: Apr 2004
Posts: 1,585
Likes: 0
From: USA
Originally Posted by npartist
Wait, you said a rock broke the bulb or the entire light/housing unit? Cause the lens/bulb is one peice and you should just be able to buy a new bulb for farily cheap anywhere online. I am not sure what the P/N is though, check the back of the bulb.
Yeah, the rock went through the front of the housing. The bulb wasn't burnt out at first, but then moisture got in there.

And something else - the OEM lights are rusty on the bottom where the light meets the mouting brackets. I think they are very cheap, and it's sad that the dealership would charge SO much money for them...
 
Reply
Old Feb 9, 2007 | 12:52 PM
  #8  
chows4us's Avatar
chows4us
6th Gear
Joined: May 2005
Posts: 15,478
Likes: 2
Originally Posted by WannaMini_
Here they are. I like the Hella ones, but all the ones that I've seen are just a little large for my taste...

http://www.ltbmotorsports.com/micocos02.html

540s, yeah, you should be able to add them. Just have to splice in the wiring. if you look at the PIAA site, you will see the exact dimensions. They just have a bolt straight down. Make sure there is a place on the current MINI mounts for that bolt.

Try looking at Hella FF200s. They are Smaller than the 540s and give more light and 1/2 the price ... http://www.rallylights.com/hella/ff200.asp $115.


Originally Posted by YellowMiniS
those are the size I want. Can you get them with chrome instead of black housings, and run them without the mesh?
No and yes.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wohnson89
R50/R53 :: Hatch Talk (2002-2006)
4
Jun 10, 2020 04:53 AM
ryGuyMCS
MINI Parts for Sale
2
Oct 20, 2015 02:24 PM
Mini Cooper r56 Pr
Drivetrain (Cooper S)
3
Aug 12, 2015 07:42 PM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM




All times are GMT -7. The time now is 05:09 PM.