Electrical Breaching the Firewall
No problem 
Help is always appreciated no matter what gen 
So I'm thinking when I do go to wire a switch there I will also just have the carven speed shift well cap thing...might as well since it will be off 
Thanks for the pics that looks like a perfect place for a switch
It looks like the pieces where the shift **** connects is all plastic?
Help is always appreciated no matter what gen There are torx screws in the bottom of the front and rear cupholders. After you remove them, the center console snaps out but is held by the shifter and e-brake boot and trim which can be removed. Other's have posted how to do this.
When I installed my switches and buttons, I didn't remove the console completely, just moved it enough to place the wiring. Also, I removed the shifter trim ring by just pulling up on it to snap it off. Then you can work from above.
When I installed my switches and buttons, I didn't remove the console completely, just moved it enough to place the wiring. Also, I removed the shifter trim ring by just pulling up on it to snap it off. Then you can work from above.
Thanks for the pics that looks like a perfect place for a switch
It looks like the pieces where the shift **** connects is all plastic?
Thread
Thread Starter
Forum
Replies
Last Post
Interior/Exterior Getting Through the Firewall
papawhiskey
Interior/Exterior
1
Sep 30, 2015 02:50 PM