Drivetrain Single Outlet Cooper S Exhaust
#1
Single Outlet Cooper S Exhaust
Well as I always strive to be different I thought I would try something new on a Cooper S. After looking at many exhausts and many configuarations i settled on this set up.
First: My Cooper S with stock exhaust.
Then lowered with new bumper single outlet exhuast:
First: My Cooper S with stock exhaust.
Then lowered with new bumper single outlet exhuast:
#6
#7
it sounds great. it has a nice tone below 3k and an awesome woosh above that when you floor it. I took it for a 5 minute ride on the highway and it produced no drone at 70 mph.
Chuck,
Allot has changed since you last saw my car. Mainly lowering springs, control arms, 17% pulley, Giac software, and 380cc injectors in Cooper package
Chuck,
Allot has changed since you last saw my car. Mainly lowering springs, control arms, 17% pulley, Giac software, and 380cc injectors in Cooper package
Trending Topics
#9
#11
So is this the Mymini or Alta with some modification?
#15
The exaust sytem is from ALTA. I just had a local shop weld up some pipe and the tip to exit in the factory Cooper location.
The cooper rear valance will fit Cooper S bumper but it is not as deep as a cooper s valance. so it might not look as factory. i will be mounting my new cooper bumper (in place of my S bumper) up front tomorrow.
The sound is great. a nice burple at low rpms and an awesome wooosh at high rps under full throttle. i will try to get a clip and post it up if i can figure out how.
The cooper rear valance will fit Cooper S bumper but it is not as deep as a cooper s valance. so it might not look as factory. i will be mounting my new cooper bumper (in place of my S bumper) up front tomorrow.
The sound is great. a nice burple at low rpms and an awesome wooosh at high rps under full throttle. i will try to get a clip and post it up if i can figure out how.
#16
#17
Cool. Now you need to get some Holies or 5-spokes for the Justa look
I just put Holies on my MCS. The steering is lighter and the 'tossability' of the car has increased.
I just put Holies on my MCS. The steering is lighter and the 'tossability' of the car has increased.
The exaust sytem is from ALTA. I just had a local shop weld up some pipe and the tip to exit in the factory Cooper location.
The cooper rear valance will fit Cooper S bumper but it is not as deep as a cooper s valance. so it might not look as factory. i will be mounting my new cooper bumper (in place of my S bumper) up front tomorrow.
The sound is great. a nice burple at low rpms and an awesome wooosh at high rps under full throttle. i will try to get a clip and post it up if i can figure out how.
The cooper rear valance will fit Cooper S bumper but it is not as deep as a cooper s valance. so it might not look as factory. i will be mounting my new cooper bumper (in place of my S bumper) up front tomorrow.
The sound is great. a nice burple at low rpms and an awesome wooosh at high rps under full throttle. i will try to get a clip and post it up if i can figure out how.
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
ECSTuning
Vendor Classifieds
7
01-04-2019 12:51 PM
ECSTuning
Drivetrain Products
0
08-11-2015 11:58 AM
ECSTuning
Vendor Classifieds
0
08-10-2015 02:03 PM
ECSTuning
Drivetrain Products
0
08-10-2015 01:59 PM