Drivetrain (Cooper S) MINI Cooper S (R53) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain FL group pulley install

Thread Tools
 
Search this Thread
 
Old May 16, 2003 | 07:54 AM
  #101  
minicoopersgirl's Avatar
minicoopersgirl
Coordinator :: South East - Florida
Joined: Oct 2002
Posts: 241
Likes: 0
From: Melbourne, FL
Man, sorry to hear that Mark.
I will be up at RENNtech this afternoon for a quick visit.
...and yes Bruce I will try to be at TS asap!
Aimee
 
Reply
Old May 16, 2003 | 04:31 PM
  #102  
Minibeast's Avatar
Minibeast
4th Gear
iTrader: (1)
Joined: Mar 2003
Posts: 305
Likes: 0
From: Fort Lauderdale
Well some good news at least. Parts came in late thsafternoon for my Mini. She'll be back on the road tomorrow and I'm back on for the pulley and software install for Sunday!!
You guys have fun tonight and I'm sorry I missed out!
 
Reply
Old May 17, 2003 | 06:34 PM
  #103  
caddman's Avatar
caddman
Banned
Joined: Jan 2003
Posts: 648
Likes: 0
From: Charleston SC
Well Randy i found my culprit on the belt issue, my tensioner broke into two peices, so therefore as i said before im pretty sure the pulley was lined up correctly, now what caused the tensioner to break your guess is as good as mine, still curious if i was having some slippage on the dyno runs at renntech, but there is no telling, i dont get the wavyness of the dyno graph at the top of the rpm band i didnt have it before, and not that drastic, so after i put the car back to gether and call mini roadside, to get the tensioner replaced under warranty ill let you how the dyno run here goes... btw as far as the ecu goes i think we were right in that the best results arent measure right after the flash is done, the 6hp and 6ftlbs, wasnt to impressive, but after driving to the car show in ft lauderdale, it seemed to get alot spunkier on the way out of town, so anyone who gets the ecu upgrade i would recommend driving 50 miles or so, before dynoing, once again ill be redynoing my car here once its fixed to see the changes, but i am quite sure we got more than 6hp and 6ftlbs, that we first dynoed, by the way as far as our top speed conversation, i hit 147-148 on the way home so i do think the power is there as far as the ecu uopgrade is concerned, just takes the ecu a little learning with the flash to get it Thanks again, and i will be calling you on monday

_________________
'02 S, mania-pulley,modified K&N typhoon intake, mania header, magnaflow exhaust, air box mod, any more details, it wouldnt be racing!!
 
Reply
Old May 18, 2003 | 11:14 AM
  #104  
Nobull60's Avatar
Nobull60
6th Gear
Joined: Aug 2002
Posts: 1,656
Likes: 0
From: Cooper City, Fl
Well everyone I just wanted to say thanks for the great time Friday night. Lots of MINIs and lots of good friends. Dinner was alot of fun even at the end with the peanut fight. Saturday went to RennTech and got the pulley upgrade done by Randy. All I have to say about the pulley is OMG!!! We went to dinner Saturday night and then called it a night. What a day !!! Took lots of pictures and will post them on a new thread tomorrow. Everyone who was thinking about getting the pulley upgrade but wasn't sure, Do It !!!! I am so glad I did. Now we can go fast straight and on the twisties.
 
Reply
Old May 18, 2003 | 11:31 AM
  #105  
RonR's Avatar
RonR
4th Gear
Joined: Dec 2002
Posts: 448
Likes: 0
From: Jupiter, FL
Greetings!

Bruce, I second that opinion. That was the best money spent! The car has so much better pull (torque) and HP throughout the rev band ! What a gentleman - and a great sense of humor !! Look forward to working with you on springs, shocks, swaybar and ECU!

I will post my pulley party pics soon !!

Best Regards,
Ron


 
Reply
Old May 18, 2003 | 02:07 PM
  #106  
Minibeast's Avatar
Minibeast
4th Gear
iTrader: (1)
Joined: Mar 2003
Posts: 305
Likes: 0
From: Fort Lauderdale
So Bruce, where were you today? Poor Randy is out there sweating bullets expecting you to show up with food and drink and entertainment, but your phone is off the hook and you're nowhere to be found!
Randy has done a fine job once again today and instead of listening to music we kept going over how the install was being done. Guess I'll have to try one and get Randy to sign me off for doing them down here!!
Going back up in the morning to pick up my software. German's fell asleep waiting on us!
 
Reply
Old May 18, 2003 | 06:15 PM
  #107  
Ben's Avatar
Ben
2nd Gear
20 Year Member
Liked
Joined: Sep 2002
Posts: 112
Likes: 11
From: St. Petersburg, FL
I've gone over most of this on the "Randy's ECU upgrade" threat. That said, I'd like to say thanks again to "our Randy", Helmut, Bob, Mike and the Renntech crew and the MCO friends I met. Great people one and all.

My MINI got the BMP filter a week ago. The Pully and ECU upgrade 5 day's later on Friday (thnks Randy & Renntech). Details on the results are on the ECU threat. My advice to fence sitters is Just Do IT! No regrets, lot's of torque, HP, great supercharger sounds and fun. Why wait ... be happy. :smile:
 
Reply
Old May 18, 2003 | 06:27 PM
  #108  
Nobull60's Avatar
Nobull60
6th Gear
Joined: Aug 2002
Posts: 1,656
Likes: 0
From: Cooper City, Fl
So Bruce, where were you today? Poor Randy is out there sweating bullets expecting you to show up with food and drink and entertainment, but your phone is off the hook and you're nowhere to be found!
Mark/Randy, Man I was so tired and had to do something with my kids today. I tried to call Randy but the phone would not connect. I was planning on going today but when I said I was going they all started to whine. So we went to the old Fashion Center in Hollywood and watched a Auto-X held by the Porsche club. WOW what a site to see them hauling *** around the parking lot. then to the mall and lunch. Anyway I'm sorry for not going again today.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
adrchn
R56 :: Hatch Talk (2007+)
7
Aug 13, 2019 02:11 AM
squawSkiBum
MINI Parts for Sale
15
Oct 2, 2015 09:21 AM
iamcamkeenan
R50/R53 :: Hatch Talk (2002-2006)
3
Aug 10, 2015 03:31 PM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM




All times are GMT -7. The time now is 05:02 PM.