so what did the Alta tech tell you? Did he suggest you go with colder plugs and if so, how much colder?

 

Hey Adam
I installed the PSRS I bought last weekend and I cant believe the difference it made in handling!Esp.coming off 217 onto I5,no more trying to keep my car in it's own lane,It is rock solid.Thanks for your help on the phone,it was the right call to set them where you said.
You guy's rock!

Allen

 

Hey Blissfull!

He suggested that I go with a plug thats 1 degree colder. I went from a stock plug thats heat range "6" to a colder heat range "7" plug.

I installed the plugs and my new Alta top mount IC about an hour ago. Haven't driving the car much except for a maiden voyage for about 10 min. after everything was back together. During that run it seemed like the car ran smoother. I'll put it through its paces this weekend!

 

Two Question how much ALTA do I have to buy before I start getting
sponsored.

2ND question do you have install instructions for your header?


Thanks,
Chris

 

blissful: We would recommend one temp range cooler. We don't get to picky on brand. Whatever you prefer is ok with us!

wtadye: Thanks for the compliments! Sorry about that broken lamp over the weekend. Hope those new stone guards help for the next time. Still LOVE your car. That color and body kit really POP!

Intense: Glad everything went well!

Putz: 1) Good question that I don't even know the answer too.
2) Sure! E-mail me at adam@altaminiperformance.com Happy to send you a copy.

Chat soon folks!

 

Oh, c'mon!! I say that next time he places an order of $200 or more, you send him a free ALTA sticker.

 

Ok, I bought a Alta top mount IC and I have a question. The IC is supported by some adjustable mounts that twist up and down to support and possition the IC. Are there supposed to be some similar mounts for the bottom?

Right now the bottom of my IC is sitting on a steel mount point where the stock IC bracket mounted. This is BAD because its metal on metal and has been wearing away the IC. I'm afraid that its going to wear holes thru the IC. I went and bought some felt pads to stop the wear points for the meantime but I really would like this thing to be mounted properly

Am I missing the lower mounts? If so can I order them?

Thanks Alta

Rob

 

I've already got about 16 alta stickers and 5 licens plate frames.

 

Wow! Sounds to me like you qualify for an ALTA hat!!

 

Oh I forgot I have an ALTA T-Shirt too (also free).

 

eager2own / putz: you guys crack me up! Stop hoarding the stickers!-)

Intense: Thanks for the question. I am lost as to what is going on there. Which version of the intercooler do you have? Maybe call me or Jeff here. So we can figure out what you need and get it too you. Also, was this purchased new or used? Happy to help!

Thanks again folks!

 

Hey Adam! how you all going! Just a bump to see if you have found anything out about the "overboost" condition I have been having.... Any luck yet?? Cheers guys! PS I had my photoshoot on Sunday! It was absolutely awsome!! I will have some of the proofs in the next few days and will be sending them through to you and posting some up here on NAM!
Cheers guys!

 

33NIM: Where are the pho-TOES! Lets see em! PM me! Later!

 

Will the Alta CAI foam filter fit in Ultrik CAI to replace the K&N cone filter? Is it sold as an element or only as CAI package? Thanks.

 

Here are some shots I took at the photoshoot Adam! I will upload the good shots when they arrive to me! ;-)

 

Not that it really matters a whole lot but why does the header on your website show the flex joint after the cat. But the one I got has the flex joint then the cat?

 

Putz: Good question. Part changed, photo didn't. Our bad! I will get someone to get on this!

ED955S: If you can get us the diameter of the mounting hole on the filter, we can cross check that for you ASAP!

33NIM: SWEET!



Thank you for the alert! Chat soon!

 

Whimsical question, I have a Alta CAI, a Alta 2.5 Cat back, and a 16% sc pulley. Have any idea what your header with cat. would add, HP. and TQ. wise? Also, any word on CARB stickers on CAI?

 

JIMINNI: CARB first. Jeff and I are working on something new as an end run on the CARB issues. (Very kool if this will work, but it will be 6-8 months away.) On the other, that would be nearly identical to my wife's convertible. That car ran out with a 15% pulley and the same mods 215 WHP. Hope that helps!

Thank you!

 

WOW i'm just hoping for 190WHP after I get the header on.

 

If you want, e-mail jeff@altaminiperformance.com he has those dyno charts that he can send you (I don't have them.)

Thanks again!

 

Hey Putz, was that the header Brad had on his shelf? Dang for that much output guess I need one .

 

k, will do when I get home, thx. .

 

Yep thats the one. I'm hoping for 190WHP with that header, ALTA CAI, ALTA Exhaust, alta 17% and 2% pulleys

 

Looks like they need to ship in another one .