Drivetrain (Cooper S) MINI Cooper S (R56) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain ALTA AccessPORT Dyno Results...

Thread Tools
 
Search this Thread
 
Old Sep 10, 2010 | 12:52 PM
  #1  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
ALTA AccessPORT Dyno Results...

I have put about 600 miles since installing the AP and so far, no issues what so ever...it's been great.

Finally had some time to do this...here are the results,
 
Attached Thumbnails ALTA AccessPORT Dyno Results...-r56dynojetbaseline.jpg  

Last edited by nkatsim; Sep 10, 2010 at 11:12 PM.
Reply
Old Sep 10, 2010 | 01:07 PM
  #2  
MotorMouth's Avatar
MotorMouth
6th Gear
Joined: Sep 2004
Posts: 3,821
Likes: 1
From: Mililani,Hawaii
Nice numbers. You can really feel the difference I bet.

There is a sticky thread at the top of this forum for dyno posts. The official Alta thread would be a good place to post them too.
 
Reply
Old Sep 10, 2010 | 01:53 PM
  #3  
countryboyshane's Avatar
countryboyshane
6th Gear
iTrader: (9)
Joined: Feb 2009
Posts: 2,568
Likes: 8
From: Bloomfield, MI
Where are your baseline results?
 
Reply
Old Sep 10, 2010 | 02:28 PM
  #4  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Thanks...def feel a difference.

Posted baseline results
 

Last edited by nkatsim; Sep 10, 2010 at 11:15 PM.
Reply
Old Sep 18, 2010 | 08:03 PM
  #5  
QuickSilverSTi's Avatar
QuickSilverSTi
2nd Gear
Joined: May 2005
Posts: 79
Likes: 0
What were your baseline numbers?
 
Reply
Old Sep 18, 2010 | 10:52 PM
  #6  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Baseline??? No idea...first time on a dyno. They gave me a print out of all 3 runs and my best run.
 
Reply
Old Sep 19, 2010 | 09:43 AM
  #7  
Chris G's Avatar
Chris G
3rd Gear
Joined: Jan 2007
Posts: 287
Likes: 0
From: San Diego, CA
Baseline = your numbers before the Accessport was installed. People are asking so they can see the actual difference that the tune makes
 
Reply
Old Sep 19, 2010 | 02:44 PM
  #8  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
oh ok...thnx! Unfortunately, I didn't do that. Car is pretty much stock except for cat back exhaust and dos cai...I dont believe they add any more hp.
 
Reply
Old Nov 2, 2010 | 06:37 PM
  #9  
mrrjm's Avatar
mrrjm
3rd Gear
Joined: Nov 2010
Posts: 161
Likes: 2
From: IL
I figured I would cut in here. I have a 2009 jcw. Stock baseline was 181 hp/202 tq. I started out with the Alta stage 1 plus the FMIC. This made a huge difference. Now I've upgraded to Stage 3. No dyno results yet. Hopefully later this month when I get a day off. This past weekend I went up to Byron dragway with my friend who has a 08 350z. Out of the 6 runs I beat him 5 times. My best time was 13.811@105. The biggest problem with traction. I post dyno results when I get them.

Ray
 
Reply
Old Nov 2, 2010 | 06:46 PM
  #10  
drewstermalloy's Avatar
drewstermalloy
6th Gear
iTrader: (4)
Joined: Nov 2008
Posts: 2,881
Likes: 16
From: Buffalo, New York
Originally Posted by mrrjm
I figured I would cut in here. I have a 2009 jcw. Stock baseline was 181 hp/202 tq. I started out with the Alta stage 1 plus the FMIC. This made a huge difference. Now I've upgraded to Stage 3. No dyno results yet. Hopefully later this month when I get a day off. This past weekend I went up to Byron dragway with my friend who has a 08 350z. Out of the 6 runs I beat him 5 times. My best time was 13.811@105. The biggest problem with traction. I post dyno results when I get them.

Ray
With the numbers you posted, I'm guessing you mean you have a MCS with the JCW tuning kit, not a JCW, right?
 
Reply
Old Nov 2, 2010 | 08:06 PM
  #11  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Dyno

Stage 3 Dyno Result
 
Attached Files
File Type: pdf
R56StockvsStag3.pdf (73.5 KB, 464 views)
Reply
Old Nov 2, 2010 | 08:26 PM
  #12  
richi0207's Avatar
richi0207
4th Gear
Joined: Aug 2007
Posts: 376
Likes: 1
From: Miami, FL
Nice numbers for a MCS with your mods!
 
Reply
Old Nov 3, 2010 | 09:49 AM
  #13  
MotorMouth's Avatar
MotorMouth
6th Gear
Joined: Sep 2004
Posts: 3,821
Likes: 1
From: Mililani,Hawaii
Originally Posted by nkatsim
Stage 3 Dyno Result

I bet you're grinning now =)
 
Reply
Old Nov 3, 2010 | 10:23 AM
  #14  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Thanks!
Haha, i am! Especially, when the wheels break loose in 3rd... I recently rotated the tires and noticed that one bolt in the front hub has been stripped...I've been taken it easy, until I get a replacement hub.
 
Reply
Old Nov 3, 2010 | 10:27 AM
  #15  
mrrjm's Avatar
mrrjm
3rd Gear
Joined: Nov 2010
Posts: 161
Likes: 2
From: IL
Originally Posted by drewstermalloy
With the numbers you posted, I'm guessing you mean you have a MCS with the JCW tuning kit, not a JCW, right?
It's a factory JCW. When we got to the strip the temp was 28 degrees. Everyone was having major traction problems. As you can tell be the high MPH the ET should have been lower.

Ray
 
Reply
Old Nov 3, 2010 | 01:28 PM
  #16  
MotorMouth's Avatar
MotorMouth
6th Gear
Joined: Sep 2004
Posts: 3,821
Likes: 1
From: Mililani,Hawaii
Originally Posted by mrrjm
It's a factory JCW. When we got to the strip the temp was 28 degrees. Everyone was having major traction problems. As you can tell be the high MPH the ET should have been lower.

Ray

I think he was refering to your basline dyno. 181hp is a bit lower than most of the JCWs have posted although the torque is closer to the normal range.

What really counts is what you've got now which I bet is much much higher =)
 
Reply
Old Nov 3, 2010 | 02:41 PM
  #17  
drewstermalloy's Avatar
drewstermalloy
6th Gear
iTrader: (4)
Joined: Nov 2008
Posts: 2,881
Likes: 16
From: Buffalo, New York
[quote=MotorMouth;3155242]I think he was refering to your basline dyno. 181hp is a bit lower than most of the JCWs have posted although the torque is closer to the normal range.
quote]

Yep, that's what I was talking about.
 
Reply
Old Nov 3, 2010 | 08:13 PM
  #18  
richi0207's Avatar
richi0207
4th Gear
Joined: Aug 2007
Posts: 376
Likes: 1
From: Miami, FL
Originally Posted by nkatsim
Thanks!
Haha, i am! Especially, when the wheels break loose in 3rd... I recently rotated the tires and noticed that one bolt in the front hub has been stripped...I've been taken it easy, until I get a replacement hub.
Sooo, since we live in same city when are we going to take each other for a ride?? I would like to see how the AP feels vs the RMW tune, although I cant complain about my tune, it feels very powerful
 
Reply
Old Nov 3, 2010 | 08:38 PM
  #19  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Richi,
Definitely! I didn't realize you are in Miami. Looks like we have similar mods too...
Nick
 
Reply
Old Nov 3, 2010 | 08:46 PM
  #20  
richi0207's Avatar
richi0207
4th Gear
Joined: Aug 2007
Posts: 376
Likes: 1
From: Miami, FL
Yeaa small word, I haven't dyno'd mine but your numbers are very impressive! Maybe we can meet up sometime!
 
Reply
Old Nov 3, 2010 | 08:50 PM
  #21  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
We'll definitely meet up. This wkend and next im away...maybe the following??? I'll pm you when I get back...
 
Reply
Old Nov 3, 2010 | 08:54 PM
  #22  
richi0207's Avatar
richi0207
4th Gear
Joined: Aug 2007
Posts: 376
Likes: 1
From: Miami, FL
Yeaaa definately! Wonder if I've seen you around
 
Reply
Old Nov 3, 2010 | 08:57 PM
  #23  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Haha...pepper white w/ pc black flame(horseshoe) rims. Im in sunny isles.
 
Reply
Old Nov 4, 2010 | 08:10 AM
  #24  
richi0207's Avatar
richi0207
4th Gear
Joined: Aug 2007
Posts: 376
Likes: 1
From: Miami, FL
Sunny isles is pretty close, I am actually in Aventura. I believe I've actually seen you a few times around i595, sweet looking car if it's you that I've seen and loving the drop.
Mine is a laser blue with complete sport stripes w/ mini challenge stripes on the side and a big 27 on the side.
Sorry to hijack thread from OP
 
Reply
Old Nov 4, 2010 | 09:11 AM
  #25  
nkatsim's Avatar
nkatsim
Thread Starter
|
2nd Gear
iTrader: (3)
Joined: Aug 2009
Posts: 106
Likes: 0
From: Miami, FL
Haha, pretty much right next door. I dont think I have seen you yet...I would def remember the challenge side stripes. Yes, i'm on 595 everyday around 430pm.
 
Reply



All times are GMT -7. The time now is 05:29 PM.