Hey guys, anyone can help showing how to install a cam shaft on MCSa 06??

 

bump, anyone?

 

Maybe the Bentley manual covers this?

 

Chapter 113 "Cylinder head"

the relevent sections are scattered through 29 pages, and two special tools are referenced

 

Thanks! I guess I need the manual

 

i have the manual
If you would like i can scan the pages in and e mail them to you...
for a friend in need yes indeed

 

O0o0o0o0o0oO, thank you so much. I would really appreciate it but do not want to bother you. I'll need the manual anyhow. I would suggest starting a new thread and making it sticky for sometime. Just to make everyone use your efforts.

 

Im gearing up to put mine in.

 

https://www.northamericanmotoring.co...t=obx+atb+diff

You can see here how Jeremy changed the cam I hope this will help you

 

What camshaft are you throwing in Silversmoke06? Read this thread too for rocker examination:

https://www.northamericanmotoring.co...d.php?t=141331

Have fun with the install!

Jeremy

 

I was putting the Rmw cam in. Had dinner with jan at like Fish tacos. and bought one finaly. I did not however get the cam in because of that damn tensioner bolt for the cam chain if anyones had experince with that. please let me know or danny will likely be putting it in for me. Lammmmeeeee. I hate wussing out on stuff like this.

And thanks for the above info.

 

Just use a 4-6 inch extension with a swival breaker bar and you should be good. You could try a universal joint on the end of the extension for clearancing too....it'll break loose.

Jeremy

 

I installed the same cam a couple of weeks ago. That cam tensioner plug was a *****. Try tackling it from under the car. I used a 3/8" flex head ratchet with an extension, probably 3" or maybe 6". I forget... I was able to torque it using a 3/8" torque wrench with a long extension too. Good luck!

 

Ill have to give it another shot this weekend. or sometime sooner.
Thanks for all the help guys.
I cant get a hold of danny from mini corsa hope hes allright

 

Bump

 

What's the bump for? Or did you finally get your new camshaft in?

Jeremy

 

You get the header on yet?

 

I didn't get it yet. Hopefully in the next day or so? I didn't receive a tracking number so if you could re-send it, I'd appreciate it.

 

I'll check on it tomorrow.... I am having a hard time getting stuff to Seattle for some reason .......... devils triangle???

 

Nah the bump was because i dident get it in yet. I will though.
I want to get that thing done. so i can get it re tuned so jan can tell me how bad i need a head and header. and all that.
Not sure if i will keep my miltek i like that its not loud but i want to to flow even better.

 

silversmoke06:
If you are scanning Chapter 113, please send to me as well as I am also waiting for a delivery of RMW stuff.

That would be awesome, thanks again.......