Drivetrain Project MSFITOY Part 2...
Out on the road, I'm pretty legal as long as I keep it under 3psi and could cruise right next to a cop without getting unwanted attention...get up on the revs and full boost and !!!
Yeah...She's LOUD!!! I know it when I can't hear the Harley next to me...
Here's the kicker:
EGT Milltek-----idle/WOT---410C/795C
EGT RMW------idle/WOT---275C/585C
Running coooool....
Now we'll see if this passes the wife test...
[/quote]
Jan stopped by my office today before flying to see you. I'm next to the airport.
Be careful when you pick him up at the airport. Between his glowing white legs sticking out of his shorts and the noise coming from your car you guys are going to attract allot of attention.
When we had the 3" on my car I think I got permanent hearing damage
. My wife wouldn't drive in the car. The new one passed her test just fine.
Longboard
Yeah...She's LOUD!!! I know it when I can't hear the Harley next to me...Here's the kicker:
EGT Milltek-----idle/WOT---410C/795C
EGT RMW------idle/WOT---275C/585C
Running coooool....
Now we'll see if this passes the wife test...
[/quote]Jan stopped by my office today before flying to see you. I'm next to the airport.
Be careful when you pick him up at the airport. Between his glowing white legs sticking out of his shorts and the noise coming from your car you guys are going to attract allot of attention.
When we had the 3" on my car I think I got permanent hearing damage
. My wife wouldn't drive in the car. The new one passed her test just fine.Longboard
Last edited by Sam; Jul 7, 2007 at 11:11 AM. Reason: attempt to circumvent obscenity filter
6th Gear
Joined: Sep 2004
Posts: 5,149
Likes: 0
Out on the road, I'm pretty legal as long as I keep it under 3psi and could cruise right next to a cop without getting unwanted attention...get up on the revs and full boost and Yeah...She's LOUD!!! I know it when I can't hear the Harley next to me...
Here's the kicker:
EGT Milltek-----idle/WOT---410C/795C
EGT RMW------idle/WOT---275C/585C
Running coooool....
Now we'll see if this passes the wife test...
Yeah...She's LOUD!!! I know it when I can't hear the Harley next to me...Here's the kicker:
EGT Milltek-----idle/WOT---410C/795C
EGT RMW------idle/WOT---275C/585C
Running coooool....
Now we'll see if this passes the wife test...
Jan stopped by my office today before flying to see you. I'm next to the airport.
Be careful when you pick him up at the airport. Between his glowing white legs sticking out of his shorts and the noise coming from your car you guys are going to attract allot of attention.
When we had the 3" on my car I think I got permanent hearing damage
. My wife wouldn't drive in the car. The new one passed her test just fine.Longboard[/quote]
Are you using the Magnaflow?
Last edited by Sam; Jul 7, 2007 at 11:12 AM.
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Jan stopped by my office today before flying to see you. I'm next to the airport.
Be careful when you pick him up at the airport. Between his glowing white legs sticking out of his shorts and the noise coming from your car you guys are going to attract allot of attention.
When we had the 3" on my car I think I got permanent hearing damage
. My wife wouldn't drive in the car. The new one passed her test just fine.Longboard
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
5th Gear
Joined: Dec 2006
Posts: 727
Likes: 0
MS- I found a sound clip for Miltek's catback. It sounds realy nice. I run a Magnaflow which iis very similar to Envidia and Borrla.
Kind of surprised that there is a general thought that the Magna sounds loud. When listening to both the Envidia and Borla they sound very much like mine and the video clips sounds I fond on youtube.
Kind of surprised that there is a general thought that the Magna sounds loud. When listening to both the Envidia and Borla they sound very much like mine and the video clips sounds I fond on youtube.
4th Gear
Joined: Jan 2007
Posts: 349
Likes: 0
Loudest exhaust eh? I might be a challenge for ya. And that's a nice picture, it kinda reminds me of something...
I hope Gary did a good job for you. He did an entire cat back for me and I'm not too pleased with how it turned out.
I hope Gary did a good job for you. He did an entire cat back for me and I'm not too pleased with how it turned out.
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
No kiddn? I didn't know you went to him too...Joel, Chris and I have been to him many times and everything's been great...what kind of problem did you experience with Gary?
4th Gear
Joined: Jan 2007
Posts: 349
Likes: 0
I ended up having an exhaust leak where he burned 2 holes in the pipe, he under-quoted me by about $150, and my exhaust tips are crooked and have surface rust. It also seemed to take forever, I was there for like 5 hours cause he had so much trouble getting anything to fit.
I originally wanted a muffler and resonator in there while going with an Alta style routing and I wanted 3" tips. He ended up not having a single muffler that would fit and the tips didn't either. He ended up putting in 2 resonators and making his own custom tips with a custom collector.
I was really surprised by the whole situation too, cause I have never heard anything bad about his work. I talked to a few people who knew him and the only thing they could think of was that he was so busy with autorama (which is around when I had it done).
I originally wanted a muffler and resonator in there while going with an Alta style routing and I wanted 3" tips. He ended up not having a single muffler that would fit and the tips didn't either. He ended up putting in 2 resonators and making his own custom tips with a custom collector.
I was really surprised by the whole situation too, cause I have never heard anything bad about his work. I talked to a few people who knew him and the only thing they could think of was that he was so busy with autorama (which is around when I had it done).
Last edited by rhubbard; Jul 5, 2007 at 09:48 PM.
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
I'd take it back and ask him to fix it for you...I'm sure he would bend over backwards to get it right for you if he knew you aren't happy...
I ended up having an exhaust leak where he burned 2 holes in the pipe, he under-quoted me by about $150, and my exhaust tips are crooked and have surface rust. It also seemed to take forever, I was there for like 5 hours cause he had so much trouble getting anything to fit.
I originally wanted a muffler and resonator in there while going with an Alta style routing and I wanted 3" tips. He ended up not having a single muffler that would fit and the tips didn't either. He ended up putting in 2 resonators and making his own custom tips with a custom collector.
I was really surprised by the whole situation too, cause I have never heard anything bad about his work. I talked to a few people who knew him and the only thing they could think of was that he was so busy with autorama (which is around when I had it done).
I originally wanted a muffler and resonator in there while going with an Alta style routing and I wanted 3" tips. He ended up not having a single muffler that would fit and the tips didn't either. He ended up putting in 2 resonators and making his own custom tips with a custom collector.
I was really surprised by the whole situation too, cause I have never heard anything bad about his work. I talked to a few people who knew him and the only thing they could think of was that he was so busy with autorama (which is around when I had it done).
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Later today, I'll try recording a clip...
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Yes...I'm still alive...
lol:
Thanks to all who came and helped celebrate Lisa's big 40... I haven't seen her cut loose like that in a loooooong time....
That was fun...I hope Nick sends me the sound clip soon so I can post it up...
lol:Thanks to all who came and helped celebrate Lisa's big 40...
I haven't seen her cut loose like that in a loooooong time....That was fun...I hope Nick sends me the sound clip soon so I can post it up...
I am sure his neighbors enjoyed him dead revving it at 11pm last night
He was a little worse for wear from the tequilia ....
He was a little worse for wear from the tequilia ....
