clubmini.ph peeps...
#3
08-25-2006, 10:50 PM
1st Gear
Join Date: May 2005
Location: Alabang, Muntinlupa City, Philippines
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
#4
08-26-2006, 02:19 AM
Join Date: Jul 2006
Location: Philippines
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
#5
08-28-2006, 05:42 AM
2nd Gear
Join Date: Apr 2006
Location: Eastwood Quezon City Philippines
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Am back!
And my PowerFlex Polyurethane bushings are here na rin.
Started installing some of them, especially the engine supports and lo & behold, I discovered some of them are really in dire need of changing.
In fact, there is that Rubber Mounting that look good and pretty on the outside, yun pala, sira na!
You better check out your cars guys. You could be running around with a faulty engine rubber mounting na. This could be a bit dangerous if driven hard.
And my PowerFlex Polyurethane bushings are here na rin.
Started installing some of them, especially the engine supports and lo & behold, I discovered some of them are really in dire need of changing.
In fact, there is that Rubber Mounting that look good and pretty on the outside, yun pala, sira na!
You better check out your cars guys. You could be running around with a faulty engine rubber mounting na. This could be a bit dangerous if driven hard.
#6
08-28-2006, 08:51 AM
Join Date: Jul 2006
Location: Philippines
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GTV
Am back!
And my PowerFlex Polyurethane bushings are here na rin.
Started installing some of them, especially the engine supports and lo & behold, I discovered some of them are really in dire need of changing.
In fact, there is that Rubber Mounting that look good and pretty on the outside, yun pala, sira na!
You better check out your cars guys. You could be running around with a faulty engine rubber mounting na. This could be a bit dangerous if driven hard.
And my PowerFlex Polyurethane bushings are here na rin.
Started installing some of them, especially the engine supports and lo & behold, I discovered some of them are really in dire need of changing.
In fact, there is that Rubber Mounting that look good and pretty on the outside, yun pala, sira na!
You better check out your cars guys. You could be running around with a faulty engine rubber mounting na. This could be a bit dangerous if driven hard.
#7
08-29-2006, 08:30 PM
ako will confirm later in the week. my MC's flares are kinda loose, had them color-keyed the other week, still don't have orig clips on all the flares. mahirap na mawalan ulit. hehehe
about engine mounts...i bought the top rubber engine mount from Mini when i went to HK a few months ago. haven't had time to have it installed though. hehehe! eric, how much did your polyurethane bushings cost?
about engine mounts...i bought the top rubber engine mount from Mini when i went to HK a few months ago. haven't had time to have it installed though. hehehe! eric, how much did your polyurethane bushings cost?
Trending Topics
#8
08-29-2006, 09:23 PM
2nd Gear
Join Date: Apr 2006
Location: Eastwood Quezon City Philippines
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Poly bushings were a little pricey man, since they were PowerFlex, supposedly the best. It was close to P35k, including UK VAT and shipping. There were a lot of bushings for the MINI (about 12 sets), including engine U&L, steering & transmission supports, F wishbones and R trailing arms, F&R anti roll bars, and 16 pieces for the R wishbones.
I need the rubber mounting with a big bolt screw on it Part # 2211-675 9732 (not included in the PowerFlex set above). It is mounted horizontally with round rubber base and the bolt screw pointing upward. It is in the middle of two other engine mounts, the big round one with a metal casing Part # 2211-675 6405 (which is also torn) and the small one that is not so visible which is closer to the engine.
I need the rubber mounting with a big bolt screw on it Part # 2211-675 9732 (not included in the PowerFlex set above). It is mounted horizontally with round rubber base and the bolt screw pointing upward. It is in the middle of two other engine mounts, the big round one with a metal casing Part # 2211-675 6405 (which is also torn) and the small one that is not so visible which is closer to the engine.
#9
08-30-2006, 04:30 AM
Join Date: Jul 2006
Location: Philippines
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mini_macky
ako will confirm later in the week. my MC's flares are kinda loose, had them color-keyed the other week, still don't have orig clips on all the flares. mahirap na mawalan ulit. hehehe
#10
08-31-2006, 08:24 AM
Coordinator :: ClubMINI.ph
Join Date: Aug 2003
Location: Philippines
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Guys, I moved all of the posts regarding the run this Sunday to this thread: https://www.northamericanmotoring.co...ad.php?t=77916
Para maganda tingnan and easily noticed.
Feel an feel ko lang pagka coordinator ko! haha.
John
Para maganda tingnan and easily noticed.
Feel an feel ko lang pagka coordinator ko! haha.John
#12
05-31-2008, 09:55 AM
#15
06-02-2008, 01:21 AM
#17
06-09-2008, 09:04 AM
my mods list could be longer IF ONLY YOU LET ME AND ED PART OUT YOUR CAR
#19
06-10-2008, 03:05 AM
#20
06-10-2008, 05:14 PM
#21
06-16-2008, 02:11 PM
Thread
Thread Starter
Forum
Replies
Last Post
fjork_duf
Factory JCW Talk (2009+)
5
12-02-2014 04:38 PM