Hey everybody. So I’m aware that there are many posts regarding the engine malfunction message and I did run a search before I posted but I’m experiencing something I did not find while perusing through all the posts. So I have a 2012 countryman S 6 speed. I recently replaced the high pressure fuel pump but this has been happening since before I replaced that. The issue I get is every time I am in 3rd gear and don’t shift into 4th gear before I hit 3500 rpms I get the engine malfunction reduce power message on my screen. No CEL light ever comes on and there are never any codes to read. The light will stay on until I turn that car back on and rev the car past 3000 rpms on either 1st or 2nd gear. But if I go past that in 3rd it comes back on. Help me figure this out! Please...

Nothing?

You most likely have BMW/Mini specific fault code(s) stored. You need something like the Carly app to pull these codes to get a better picture of what’s going on. How many miles on the turbo?

There are codes there, there has to be for something like that. As said above, you need to have them read by a Euro shop or get something like Carly or a scan tool like the Schwaben from ECS to read the BMW specific codes