R60 What did you do to your Countryman TODAY?
2nd Gear
Joined: Nov 2014
Posts: 118
Likes: 0
From: UK
took it for second service today (33 months old, 37520 miles). at the weekend i treated it to a full machine polish and tied out the Nanolex Si3D coating - looks pretty good, but whether it lives up to its claims is a matter of time and monitoring...
I finally ordered my replacement headlights (halogen to xenon) for my MCS and got them installed! Here a pic with one side finished and a video on how to install them; I've never seen a YouTube video showing how to install the Countryman headlights...until now. 😀
YouTube video - https://youtu.be/4M1wbkbauVc
Enjoy!
YouTube video - https://youtu.be/4M1wbkbauVc
Enjoy!
Good video
Its not that hard and you just showed how. Well done.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
2nd Gear
Joined: Jan 2016
Posts: 102
Likes: 3
From: Atlanta
Looks good. Did you do the work yourself? If so where did you an a full range audio output from ?
2nd Gear
Joined: Jan 2016
Posts: 102
Likes: 3
From: Atlanta
I had a muffler shop cut out the factory resonator, run 2 1/2' inch pipe into a y pipe then added 2 Magnaflow racing series mufflers.
http://www.magnaflow.com/products?partNumber=14156
I then added two 4 1/2" chrome tips.
Looks and sound amazing!
http://www.magnaflow.com/products?partNumber=14156
I then added two 4 1/2" chrome tips.
Looks and sound amazing!
Lowering Springs
Hi Mojo:
These lowering springs should do the job:
http://new.minimania.com/part/G2NMS2...-R61-All4-Only
Don't forget, you will need adjustable rear control arms, too:
http://new.minimania.com/Search_Inve...0control%20arm
Hope this helps!
Drive Hard. Drive Safe. Keep Grinning.
These lowering springs should do the job:
http://new.minimania.com/part/G2NMS2...-R61-All4-Only
Don't forget, you will need adjustable rear control arms, too:
http://new.minimania.com/Search_Inve...0control%20arm
Hope this helps!
Drive Hard. Drive Safe. Keep Grinning.
2nd Gear
Joined: Nov 2014
Posts: 65
Likes: 0
From: Culver City, CA
got my ECS "care package" yesterday. looks like i got plans for the weekend, big plans!
Sprint Boost, Wheel caps, LED plate lights, red brake lines, pads and caliper paint, Forge atm bov, drilled/ slotted rotors
Forge atm Bov upgrade
Sprint Boost, Wheel caps, LED plate lights, red brake lines, pads and caliper paint, Forge atm bov, drilled/ slotted rotors
Forge atm Bov upgrade
Thanks for the order
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
1st Gear
Joined: May 2016
Posts: 25
Likes: 0
From: Sterling, Virginia
Question,
your grill lights, what switch are they connected to? did you run their own switch, are they connected to your highbeams or foglights?
thanks!
your grill lights, what switch are they connected to? did you run their own switch, are they connected to your highbeams or foglights?
thanks!
No more rear wiper, smoked side markers, lowered on Megan's Coilovers. Stage 3 tuning and bigger turbo mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2nd Gear
Joined: Nov 2014
Posts: 65
Likes: 0
From: Culver City, CA
with no more run flats, I have made a patch kit for those "just in case" scenarios. cost under $115.00
1- multipurpose tool
1- dynaplug air gun
1- set of plug n pull stems
all fits in the cubby hole
1- multipurpose tool
1- dynaplug air gun
1- set of plug n pull stems
all fits in the cubby hole