Over the wkend discovered i must have ran over a good size branch or something when i drove to the gorge for a hike. Got a hit up front by fog light area and scratched up the corner of the JCW kit (plastic part). Trying to conditioning it

 

Awesome Look!

I went the carbon fiber way....op

 

Mounted the Ragazzon exhaust today.

 

Picked up Mini Roof Bars and basket off of Craigslist. Great Deel and met a nice former mini owner.

 

KohlerSC -

This is the NM Engineering R60 Rear sway bar : 22mm adjustable NM.258860

http://www.ecstuning.com/Search/SiteSearch/NM.258860/




And we now Carry Milltek Exhaust for the R60 S All4 :

Cat Back SSXM402

http://www.ecstuning.com/Search/SiteSearch/SSXM402/




and

Turbo Back SSXM400

http://www.ecstuning.com/Search/SiteSearch/SSXM400/



thanks

 

I had heard Milltek was going to stop supporting the Countryman...

 

Nope they have it and support it and we are there largest stocking distributor in the America.

 

Had to take mine into the body shop for injuries sustained while encountering giant tire pieces being flung from 18-wheeler ahead of me.

 

Damn you ECS...I had looked into getting one earlier this year but had been told they were no longer supported, so I moved on (financially and emotionally), now you're pulling at my heartstrings. I still really want to hear this exhaust in person before dropping the $ though.

 

Sorry , I did not know or hear about this.

Ok, yea where did you hear this?

Here some examples people posted of the Milltek, sounds good.

 

No need to apologize (and please don't think I was actually mad at you); not your fault. I had heard it from a member on here and had confirmed it with the vendor I was trying to go through.

 

No problem, not mad , just wanted to make sure. We are really happy to carry Milltek and stock most if not all exhaust with pictures.

 

This week I had the resanator removed and installed the NM Engineering R60 Rear Sway Bar this morning.

 

Bought new plugs/wrench from ECS and installed today. Photo is of old plug with Corona around insulator which apparently is normal according to Beru and all the other plug manufacturers. Plugs weren't due and didn't look bad, although the gaps were wider than the new plugs so I changed them out. Butt dyno says slight improvement.

Attachment 110661

 

Thanks for the purchases. Browning is typical with age / heat.

 

Some place might not carry R60 Milltek goods but is there. They might dont stock the item b/c it could be a special item but they do have it for R60

 

Install aftermarket mud flaps

 

Yes , we have them and many other instock Milltek exhaust.

If you need Milltek , we have you covered.

 

Free shipping on Milltek for a Limited time.

 

Filled the tank, Fred Meyer gasoline station which is Shell Oil Gas. Generally cheaper than most other places. Now the rest of the story. Idiot puts in regular when I asked for Premium fill, then said sorry. Big help. Spoke to manager who offered to have the "truck" come and drain the tank and put the right gas in. However that was a 1 hour wait at best. Obviously this is a pretty common event. I had him throw in a can of octane booster on the house and went on my way. All in all I'm avoiding this place in the future, but the manager was pretty cool.

Got me thinking and then I found this site http://www.gnttype.org/techarea/misc/octanebooster.html anyone have any experience with home brew booster?

 

Having NM 22mm ready sway bar installed today. Can't wait to pick the car up tomorrow and check it out!

 

Added a Mini minion

 

Installed NM RSB.... While wheels were off, took the opportunity to put mudflaps all around. Now deciding what's next.

 

Nice !

 

Ha! Thats awesome!