I have a ton of MINI stuff that could be sold to make some room in our smaller shop. All parts are used unless otherwise specified.

OEM Cooper S spring set (all 4) $100

H&R R53 front springs only (I used these successfully with a stock rear cut coil spring) $50

OEM header with cat $450

OEM intercooler $150

OEM intercooler cover $35

OEM Cooper S camshaft $50

OEM bonnet mounted intercooler diverter $25

OEM intake hose $15

OEM airbox rear panel $5

OEM steering wheel airbag $50

OEM sunvisor $10

OEM '02 rear boot cover (interior piece) $20

OEM fog lights $15

OEM AC compressor $75

OEM washer fluid reservoirs $10

OEM front skid plate (plastic) $15

OEM Cooper S rear aluminum battery skid plate $10

UUC aluminum flywheel with bad starter ring $100

NEW M7 AGS intake $100

NEW Ebay special Cooper S intake $25

NEW 19% MINI-Madness pulley $75

NEW TCE rear big brake kit $200

Email me with interest. I can obviously take all forms of credit card payment, and ship FedEx. I am working on larger items' shipping through Greyhound, and when I have it sorted, I'll post up those items as well.

Thanks!
Randy
randy@webbmotorsports.com

 

PM sent fog lights

 

what type of intake is the ebay special? Im also not too familiar with the my intake as well. This for an R53 or R56?

 

The M7 AGS is an intake that replaces the throttle body tube with a straight shot tube, includes a heatshield and all the mounting bits, plus the filter obviously.

The ebay special is an aluminum tube that goes to the throttle body and a cone filter.

I appreciate the interest, but the PMs are kind of a pain to keep track of. Please email me with questions or interest.

Thanks!

I also have the following items:

Used Milltek header with no cat $150

New polished stainless steel race header 4 into 1 with no cat $250

Misc interior panels to be shipped by Greyhound to your closest city - assorted pricing...

Randy
randy@webbmotorsports.com

 

Can you post pictures of the intakes please?

 

pm sent for ags.

 

I only had two AGS systems, and it looks like both are spoken for. I will post a pic of the Ebay special when I get back on the first.

Thanks,
Randy

 

Will the milltek header fit my 02 MC? If so, could I still attach a cat to it?

 

Also, what comes with the rear big brake kit?

 

I get back from a trip on the 1st, so I will be answering emails and PMs then, so I can sort out who asked for what first.

The Milltek header will fit the convertible, and a stock cat can be welded in place from your header.

The TCE rear kit is their stage 1, which includes the spacer for the stock caliper, the braided lines, the large rotors and aluminum hats.

Thanks!
Randy

 

Do you happen to have a black (or is it charcoal??) leatherette driver's side front seat?

 

Misc interior parts... to fit '06 MCS? what do you have?

 

this is alittle off topic, but how did your car ride with the cut rear springs? I've never heard anyone doing that before.

 

I don't have any seats left. As far as interior parts, I have the shift boot for an R53, the side trim panels, the rear boot plastic interior panel, and a bunch of seals.

The cut springs isn't something I'd recommend doing *****-nilly. I checked the rates on a spring tester, compared them to the H&R, then calculated, based on the known factors, what the new rate would be if I cut certain lengths (and what the ride height would be). All that said, it did exactly what I wanted it to. This was before all of the other spring kits hit the market, and it foreshadowed what I was working on with other companies.

As far as what has sold:

Both AGS intakes
Rear boot cover (I do have one more)
TCE rear brake kit
OEM fog lights (I just found another set today, so I will PM the other parties in order of interest)

I also realized today that I also have '05-'06 crank pulleys for those who would like the lighter set up. I will sell those for $125.

I have a Pilo rear strut brace as well - $75.

I'll work on the pics of the intake left, the header that's new and the Milltek with the replacement pipe.

All of the OEM headers have perfect cats (someone emailed that question).

Hope that helps!
Randy

 

I also have the uprights on the center console from the interior, and a rearview interior mirror. I have the rear seats in leatherette as well.

Here are the pics:

Header



This is a Pipercross OEM filter replacement (NEW) $18


This is a pedal set I had made a few years ago, and never used them. They are a great upgrade for the '02 cars! $80 for the whole set.


And the Ebay special intake for a Cooper S R53...

 

PM sent.

 

PM replied to

 

do you still have the AGS???!!!!!!?????!!

PM SENT

Just saw that you sold them, missed it by a few days!!!!!!! @*$#!@%$@#

 

emailed re; uprights

 

Randy

I need a total price on the front fogs, and r50 boot cover shipped to Dayton or Cincinnati Ohio

Thanks

 

Emails sent, thanks!

I also have a few other pieces I found:

NEW JCW OEM front strut brace still in box: $180
OEM JCW cylinder head, less than 5,000 miles: $1350

I have sold all the fog lights.

I do still have more crank pulleys, headers and assorted interior pieces, as well as the NEW Cooper Pipercross filter, the NEW Race header, the used Milltek header, the pedals, the Ebay intake, and a lot of the original items in the first post.

Thanks!
Randy

PS - Someone let me know that I am apparently no longer in business per a rumor they heard at AMVIV. Uh, that's news to me! I really shouldn't be wasting money on advertising here on NAM or manufacturing parts anymore if that's the case. It is NOT the case, and in fact I have been completely booked every month here at the shop for the last 4 months solid.

I am selling my used and misc stuff because I started a personal project with my kids (building a Lotus Se7en from scratch).

 

I also have a slightly used AC compressor, a ton of fuel injectors, and that Madness 19% pulley (NEW).

Randy

 

Randy--

Still got any front fogs (specifically passenger side, well right side)? and shift boot?

 

Email sent regarding "Airbox rear panel".

 

Has anyone received their items?

I sent payment via Paypal as soon as I received the invoice but the payment is still "unclaimed"...

I'd really like to receive my merchandise before MOTD...does anyone have a phone number for Randy?

Thanks!

Erika