Inexpensive, Simple Brake Feel Mod

Reply Subscribe

Thread Tools

Search this Thread

May 5, 2007 | 05:44 AM

#126

cristo

Alliance Member

Joined: Apr 2003

Posts: 4,101

Likes: 230

From: York, Pennsylvania

30-5 Nm (22-4 ft-lb)

May 5, 2007 | 07:32 AM

#127

apexer

6th Gear

Joined: Aug 2003

Posts: 1,344

Likes: 0

From: Uniontown, PA

Quote:

Originally Posted by Motorrr

Amen to the value of this brake upgrade!
I'm without a Bentley or Haynes Manual-what is the recommended torque number for the 7MM allen head guide pins?
thank you for your time.
MOTORRR

I know its not much, not sure but about 25ft.lbs. Frankly, I don't bother to torque mine...snug them down then half a grunt

May 5, 2007 | 09:20 AM

#128

Motorrr

1st Gear

Joined: Feb 2006

Posts: 33

Likes: 0

Banjo bolt torque?

I found the info. for the guide pins buried in another post.

30.5 Nm or 22.4 ft/lbs. for the guide pins.

But what about the banjo bolt torque for the front brake lines- Anyone know

that one?

Thanks, MOTORRR

May 5, 2007 | 09:22 AM

#129

Motorrr

1st Gear

Joined: Feb 2006

Posts: 33

Likes: 0

Cristo,

May 5, 2007 | 09:28 AM

#130

SRTech

Former Vendor

Joined: May 2005

Posts: 3,480

Likes: 0

From: Oakhurst/Fresno, CA

Quote:

Originally Posted by Motorrr

Amen to the value of this brake upgrade!
I'm without a Bentley or Haynes Manual-what is the recommended torque number for the 7MM allen head guide pins?
thank you for your time.
MOTORRR

30 Nm or 22 ft-lbs.

Steve