Just out of curiosity...


Size: 18 inches
Front Wheel Width: 8 inches
Rear Wheel Width: 8 inches
Wheel Finish: Polished
Wheel Condition: Brand New
Bolt pattern: 5 X 114.3 / 5 X 4.50
Dual Drill Bolt pattern: N / A
Front Wheel Offset: +45
Rear Wheel Offset: +45

Can those fit?

And... if those wheels are not TPMS, is there:
a) a retrofit
b) a way to just ignore TPMS?

this is /just/ in case I get to reuse some wheels I have for summer.

 

Ah, nevermind.. the obvious! 4 bolts, not 5...

 

If you reeeeaaallly like them:

there are adaptors out there.... seeing they have a rather high offset you could sandwich in an adaptor and maybe be ok... granted thats going to cost more bucks.

as for TPMS... you can use your stock sensors, buy new ones (150-200 bucks), or have the idiot light on at all times w/o them..

 

Sounds like a Nissan SE-R fitment

 

Other than the adapter requirements, 18x8 et 45 is a pretty common fitment. You could use an adapter that was up to 15mm wide without much rubbing (assuming the car is lowered), but I wouldn't use anything much wider than that. I guess you could always adjust camber if the adapter needs to be wider than 15mm, or just run some poke.

 

you guessed it ;-) That was my trade-in for the mini... I'm either selling the rims, or using them.

 

well if your not already buying them... maybe research the sdaptors... probably about $200(?) for good ones

edit: cant really find them... nobody wants to really go from 4 to 5 or anything to anything for that matter