Tires, Wheels, & Brakes Discussion about wheels, tires, and brakes for the new MINI.
Sponsored by:
Sponsored by: CARiD

Show me your WHEELS!

Thread Tools
 
Search this Thread
 
Old Mar 9, 2006 | 02:39 PM
  #2226  
pauliekeys's Avatar
pauliekeys
5th Gear
iTrader: (3)
Joined: Mar 2005
Posts: 967
Likes: 0
Originally Posted by mattsmini
Those wheels look really familiar.

My enkei J10s
Ebony and Ivory Yea baby! Coilovers? must be, cuz you are sittin mighty low. Nice! Love your color. It was my other choice. Very very nice.
 
Old Mar 9, 2006 | 02:52 PM
  #2227  
pauliekeys's Avatar
pauliekeys
5th Gear
iTrader: (3)
Joined: Mar 2005
Posts: 967
Likes: 0
Originally Posted by Thameth
Awesome looking PW MCS! Now you gotta update your sig!
It took me a minute to figure out what you ment about my signiture,but after scratching my head and pounding it on the table I figured it out.(Duh). I like my photo shop painting but your right, it might be time to update. I am now looking for some auto cross wheels and tires. Could you tell me your set up and why you like it. I'm not going to race but every other month and after buying these last wheels my wife will kill me if I spend to much money right now(what ever). I think I remember seeing a post you made with your set up but I can't seem to find it.
 
Old Mar 9, 2006 | 03:23 PM
  #2228  
mattsmini's Avatar
mattsmini
1st Gear
Joined: Jan 2006
Posts: 18
Likes: 0
Megan coilovers
 
Old Mar 9, 2006 | 08:54 PM
  #2229  
Thameth's Avatar
Thameth
5th Gear
Joined: Nov 2003
Posts: 1,027
Likes: 0
From: Miami, Fl
Originally Posted by pauliekeys
It took me a minute to figure out what you ment about my signiture,but after scratching my head and pounding it on the table I figured it out.(Duh). I like my photo shop painting but your right, it might be time to update. I am now looking for some auto cross wheels and tires. Could you tell me your set up and why you like it. I'm not going to race but every other month and after buying these last wheels my wife will kill me if I spend to much money right now(what ever). I think I remember seeing a post you made with your set up but I can't seem to find it.
My Autox wheels are 16x7 Rota Slipstreams 40mm offset(go with 38 if you can) in Full Royal Sports Bronze. They're 12.5 lbs and very inexpensive, a set of 4 can be had for $450-500 in 16in. Tire wise i run Falken Azenis 215-45-16, but i might switch to Hankook RS-2's next year.

So you can have a great Autox wheel and tire setup for about $800-$900.
 
Old Mar 9, 2006 | 09:28 PM
  #2230  
kenchan's Avatar
kenchan
6th Gear
iTrader: (3)
Joined: Sep 2003
Posts: 31,439
Likes: 4
^^ looks good. i personally prefer 16's on this car too. actually, 16x7.5's.
 
Old Mar 9, 2006 | 11:43 PM
  #2231  
hamann's Avatar
hamann
3rd Gear
Joined: May 2005
Posts: 281
Likes: 0
From: bay area ca
i purchased my mcs june of last year and i only have 1700 pampered miles . I drive my denali daily(comfort) lowered with 22 hre wheels love all my cars made them all the way i like it....

Originally Posted by MINI Monkey
It must be hard to pick which car to drive each day. That is a huge line up.
 
Old Mar 10, 2006 | 07:27 AM
  #2232  
RallyMINI2005's Avatar
RallyMINI2005
3rd Gear
Joined: Aug 2005
Posts: 190
Likes: 1
From: Boston, MA
F.F.F. - Fatties Fit Fine!

SO I cribbed this slogan from the guys at Surley Bikes, but it seemed appropriate:

Check out my new rollers... The wheels are Team Dymics Pro Race 1.2's from Outmotoring.com. They weigh in at 13lbs each and are 15X7's.

The tires are BFGoodrich GForce Sports in 225/50/R15 and weigh in at 24lbs each.

Grand total, each wheel/tire weighs 37 lbs, or a loss of 18lbs (32%) per corner as compared with my S-lites!


Check out more details in this thread: https://www.northamericanmotoring.co...647#post855647



RM2k5
 
Old Mar 10, 2006 | 09:24 AM
  #2233  
pauliekeys's Avatar
pauliekeys
5th Gear
iTrader: (3)
Joined: Mar 2005
Posts: 967
Likes: 0
Originally Posted by Thameth
My Autox wheels are 16x7 Rota Slipstreams 40mm offset(go with 38 if you can) in Full Royal Sports Bronze. They're 12.5 lbs and very inexpensive, a set of 4 can be had for $450-500 in 16in. Tire wise i run Falken Azenis 215-45-16, but i might switch to Hankook RS-2's next year.

So you can have a great Autox wheel and tire setup for about $800-$900.
Why 38 offset? Do they make a 16x7.5? Because of the fact that I'm using the H-sport springs I can't run in the stock class, so I might as well go with what will put the most rubber on the pavment if it helps. A 16x7.5 might not make that much of a difference but I wouldn't know since I haven't race the car. Are there other wheels that you would recommend in the same price range and weight but in a mesh pattern?
 
Old Mar 10, 2006 | 05:39 PM
  #2234  
Thameth's Avatar
Thameth
5th Gear
Joined: Nov 2003
Posts: 1,027
Likes: 0
From: Miami, Fl
Originally Posted by pauliekeys
Why 38 offset? Do they make a 16x7.5? Because of the fact that I'm using the H-sport springs I can't run in the stock class, so I might as well go with what will put the most rubber on the pavment if it helps. A 16x7.5 might not make that much of a difference but I wouldn't know since I haven't race the car. Are there other wheels that you would recommend in the same price range and weight but in a mesh pattern?
I was recommending 38 offset to push them out a little further and give you a slightly wider track. I'm thinking about getting 6mm spacers (3mm each side) for mine because it seems i can get them out a little further with no rub, especially with as much camber i'm pushing.

As of right now i haven't really seen too much of a need for 7.5, tire selection is a bit dificult to find above 225 and if you do find 235 you might have rubbing issue's with the strut first before you hit a fender. 225 Hankook Rs-2's fit on my 16x7's no problem and no bulge which shouldn't because causing any skwirm(sp?) issue's.

I guess 16x7.5 would be optimal, and i think there is a group buy going on somewhere for 15x8's, but i'm not sure you'll be able to fit enough tire for those wheels.

Ohh and also if your not planning on upgrading your brakes in the future with a BBK then you can even go down to a 15in wheel (lighter, even quicker gearing, and cheaper tires).

Search for OasisT , he's got a Rota Group buy going for 15x8's i think.
 
Old Mar 11, 2006 | 03:16 PM
  #2235  
DarkMiniCooperS's Avatar
DarkMiniCooperS
6th Gear
Joined: Dec 2003
Posts: 1,805
Likes: 30
From: Quebec City, Qc
A picture of my wheels with the center cap on it...

I really look foward to install them on my car soon. I only need (actually wait for) new bolts and I'm ready to install them!

 
Old Mar 11, 2006 | 06:35 PM
  #2236  
rjmann's Avatar
rjmann
4th Gear
Joined: Nov 2005
Posts: 350
Likes: 2
From: MA
Ahhh... the weathers warmed up enough here that I actually ordered tires for the TrakLites I bought a couple of months ago. Another month or so and maybe I'll be able to post a pic or two.
 
Old Mar 11, 2006 | 06:41 PM
  #2237  
ScuderiaMini's Avatar
ScuderiaMini
6th Gear
Joined: Apr 2005
Posts: 4,431
Likes: 0
From: Boerne/SAtown TX
rjman, what color traklites did you get? black ones? i like those a lot
 
Old Mar 12, 2006 | 08:44 AM
  #2238  
Passat774's Avatar
Passat774
5th Gear
Joined: Mar 2004
Posts: 1,010
Likes: 0
From: Chesapeake, Virginia


New wheels, but the same...

3 pc Enkei 18"
225/40/18 Conti Sport Contact 2 (no rubbing or trim needed !!)

Click to supersize
 
Old Mar 12, 2006 | 08:46 AM
  #2239  
DarkMiniCooperS's Avatar
DarkMiniCooperS
6th Gear
Joined: Dec 2003
Posts: 1,805
Likes: 30
From: Quebec City, Qc
Originally Posted by Passat774


New wheels, but the same...

3 pc Enkei 18"
225/40/18 Conti Sport Contact 2 (no rubbing or trim needed !!)

Click to supersize
Awesome wheels ! And ur MCS looks great too!
 
Old Mar 12, 2006 | 09:09 AM
  #2240  
ScuderiaMini's Avatar
ScuderiaMini
6th Gear
Joined: Apr 2005
Posts: 4,431
Likes: 0
From: Boerne/SAtown TX
Passat very nice, how is the ride with the big 225/40/18s? If i go back to 18s i will try 215/40/18s, but 225 looks good too, but give 0.0000001" drop, you are in trouble
 
Old Mar 12, 2006 | 03:48 PM
  #2241  
Passat774's Avatar
Passat774
5th Gear
Joined: Mar 2004
Posts: 1,010
Likes: 0
From: Chesapeake, Virginia
I like 225/40/18 and even with a full tank still no issues !! And no plans to lower the car with thise set of wheels!!

And thanks for all the kind words
 
Old Mar 12, 2006 | 03:53 PM
  #2242  
rjmann's Avatar
rjmann
4th Gear
Joined: Nov 2005
Posts: 350
Likes: 2
From: MA
Originally Posted by ScuderiaMini
rjman, what color traklites did you get? black ones? i like those a lot
Sorry no, anthracite. Having owned a couple of black cars, I didn't want black wheels. Figured they'd get visibily dirty too quickly.
 
Old Mar 12, 2006 | 04:02 PM
  #2243  
blalor's Avatar
blalor
6th Gear
Joined: Jan 2005
Posts: 1,231
Likes: 0
From: RVA
My turn, finally!

It's been a long, hard road, and the journey's not quite over yet (dåmn hubcentric rings!) but my wheels and tires are on!

15x7" Konig Rewind wheels (+40 offset) with 225/50/15 Yokohama AVS ES100 tires.



More pictures in
/.
 
Old Mar 12, 2006 | 04:18 PM
  #2244  
blalor's Avatar
blalor
6th Gear
Joined: Jan 2005
Posts: 1,231
Likes: 0
From: RVA
Mmmm, *meaty*...

One more, showing that big fat tire. :-)

http://www.flickr.com/photos/blalor/111626350/
 
Old Mar 12, 2006 | 05:25 PM
  #2245  
ScuderiaMini's Avatar
ScuderiaMini
6th Gear
Joined: Apr 2005
Posts: 4,431
Likes: 0
From: Boerne/SAtown TX
 
Old Mar 12, 2006 | 06:21 PM
  #2246  
mcs22004's Avatar
mcs22004
5th Gear
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: USA
Originally Posted by blalor
It's been a long, hard road, and the journey's not quite over yet (dåmn hubcentric rings!) but my wheels and tires are on!

15x7" Konig Rewind wheels (+40 offset) with 225/50/15 Yokohama AVS ES100 tires.





More pictures in this photoset on Flickr.
How close to rubbing are they?
 
Old Mar 12, 2006 | 06:45 PM
  #2247  
blalor's Avatar
blalor
6th Gear
Joined: Jan 2005
Posts: 1,231
Likes: 0
From: RVA
Depends on your definition of "close". ;-) I'd say there's around a half inch between the sidewall and the strut up front. I didn't really check the back. Provided that clearance doesn't change with suspension movement, I'll be fine.
 
Old Mar 12, 2006 | 07:55 PM
  #2248  
jon.k's Avatar
jon.k
3rd Gear
Joined: Nov 2004
Posts: 159
Likes: 0
From: Canada
those rewinds look awesome
 
Old Mar 13, 2006 | 03:39 AM
  #2249  
blalor's Avatar
blalor
6th Gear
Joined: Jan 2005
Posts: 1,231
Likes: 0
From: RVA
Thanks. They were supposed to be the graphite color, like DiD's and the RallyMINIs' (RallyMINI and RallyMINI2005), but I failed to specify when I ordered. I'm fairly sure I'm losing my mind. Best to enjoy it while I can... :-)

I'm keeping them, but I'm still not sure which color I prefer.
 
Old Mar 13, 2006 | 03:42 AM
  #2250  
Motor On's Avatar
Motor On
6th Gear
iTrader: (1)
Joined: Oct 2005
Posts: 20,848
Likes: 15
Originally Posted by blalor


More pictures in this photoset on Flickr.
That left front looks flat!
The Thick side is a sweet touch on the MINI, reminds me of a classic
 



All times are GMT -7. The time now is 05:46 AM.