GP2/JCW Underbody Panels
For SaleExterior Body Parts
Dec 24, 2023, 04:45 PM | Replies: 7 | Views: 1700
-
Price
$280
- Location Fresno, CA, 93727, USA
- Condition Used
- Compatibility
| Make | Model | Year |
|---|---|---|
| Mini | R56: "Mk II" Mini Hatch/Hardtop range | Any Year |
| Mini | R58: Coupe | Any Year |
| Mini | R59: Roadster | Any Year |
Description:
GP2/JCW Underbody panels for R56 Minis.
These are very large (the length of the car essentially), so I feel like shipping will be very expensive. As such, these may have to be pickup only. Located in Fresno, CA.
Aerodynamic component that smooths airflow under the car. Helps reduce drag and increases aerodynamic efficiency. Attaches to the car with plastic nuts on pre-existing studs. I've included all the nuts I used plus some extras, as well as the little steel brackets that secure the rear of the panels.
I've included a picture of the underbody with the panel installed on the left vs. no panel on the right to show how much smoother it makes the bottom of the car.
Last edited by magik-biped; Jan 7, 2024 at 11:31 AM.
Thread Starter
|
2nd Gear
Joined: Jun 2017
Posts: 76
Likes: 10
From: Fresno, CA
Weird. I didn't edit the text color when I made the post but did copy/paste from another poste I had made, which may have copied over the color.
The text is visible in dark mode which I use but yeah I just checked in light mode and you're right, you can hardly see it. I will change the text color.
Thanks for letting me know!
The text is visible in dark mode which I use but yeah I just checked in light mode and you're right, you can hardly see it. I will change the text color.
Thanks for letting me know!
I bought a set of these for my car a while ago. The shipping cost was around $200. The length of them was the issue. I only paid $100 for them but with shipping total cost was $300 (ish). If you’re wanting that much for them local sales would help but I’m not sure you’ll be able to get them sold for $500. Just putting it out there that the shipping is costly. Good luck with your sale. A great part for an R56!
Thread Starter
|
2nd Gear
Joined: Jun 2017
Posts: 76
Likes: 10
From: Fresno, CA
I bought a set of these for my car a while ago. The shipping cost was around $200. The length of them was the issue. I only paid $100 for them but with shipping total cost was $300 (ish). If you’re wanting that much for them local sales would help but I’m not sure you’ll be able to get them sold for $500. Just putting it out there that the shipping is costly. Good luck with your sale. A great part for an R56!
I can meet partway if anyone in CA wants to pick these up.
Any chance these are still available?