Hello, been a while!

So I’ve got a set of the JCW Pro coilovers left from my previous F56, but the new car has DDC.

What are my options when thinking about retrofitting the JCW Pro suspension onto a DDC car?

I know that technically they’re “not compatible” according to MiniUSA, but there’s at least one user (pertplus) on this forum who had this configuration. Additionally, the Justa F56 is not technically compatible either with this suspension, and I managed it.

What issues do you all foresee me running into?

 

If you can get a EDC cancellation kit for it, you can do the swap. I know that KW has a set of coilovers that is DDC compatible and it includes the EDC cancellation kit.

 

Yes, you can do it, I have it on mine, and it started out with DDC. I had the dealer install it, though, so I don't know the tech bits they had to do. I did have KW's DDC cancellation kit installed, too, though.

 

Actually the kits for DDC and non DDC are different as the shaft sizes are different. So you should get a set designed for DDC that will also include the cancellation modules.
We've been the happiest with the KW V2s
https://www.waymotorworks.com/kw-var...overs-f56.html

But I have an open box of V3's with DDC for a deal
https://www.waymotorworks.com/open-b...-with-ddc.html