R56 rear alignment - North American Motoring

Suspension Springs, struts, coilovers, sway-bars, camber plates, and all other modifications to suspension components for Clubman (R55), Cooper and Cooper S (R56), and Cabrio (R57) MINIs.

R56 rear alignment

Reply

 
 
 
  #1  
Old 08-05-2018, 06:48 AM
Kinger
Kinger is offline
Neutral
Thread Starter
Join Date: Nov 2015
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
R56 rear alignment

Hi Folks,

I just had to replace a rear right trailing arm and shock on my 2008 cooper s.

I marked the trailing arm bushing location before i removed it and placed the new one as close as possible.

Also marked the position of the adjustable bolt on the lower comtrol arm before I removed it and placed the new one as close as possible.

Can i do the alignment myself or do I Need to take it in?

cheers and thanks

andrew
 
Reply With Quote
  #2  
Old 08-05-2018, 08:06 AM
cristo's Avatar
cristo
cristo is online now
6th Gear
Join Date: Apr 2003
Location: York, Pennsylvania
Posts: 3,598
Thanked 38 Times in 38 Posts
4wheel alignment is pretty accurate with the string box around the car method.
Remember that the rear track is slightly wider than the front so
you want the space from string to front tire further by half that amount each.
For camber, you can get surprisingly accurate numbers with a
12 inch combo square with level plus a small steel rule and a
calculator for the trig.
Also need a level surface to park on.
Failing that, can check one way then turn the car around 180 degrees
and check again and take the average.
Shifting the rear trailing arm to adjust rear toe is a bit hit and miss,
easier with the eccentric socket tool but certainly doable without it.
 
Reply With Quote
  #3  
Old 08-21-2018, 09:54 AM
mbwicz
mbwicz is online now
6th Gear
iTrader: (3)
Join Date: Aug 2011
Location: Buffalo area, NY
Posts: 1,741
Thanks: 0
Thanked 19 Times in 17 Posts
It depends what you want to do. If this is a track or performance application, then I would get it aligned. If its a daily, then I would set the toe, and see how the car drives. I like the string method, but I measure the distance between the strings at the front and rear of the car to setup the box, rather than adjust for track width.

If the car turns the same left and right, then I wouldn't worry about the alignment. Toe will wear out tires quickly and has a pretty significant impact on handling.

Mike
 
Reply With Quote
  #4  
Old 12-06-2018, 11:24 PM
E34M5
E34M5 is offline
2nd Gear
Join Date: Nov 2010
Location: Richmond B.C.
Posts: 86
Thanks: 0
Thanked 4 Times in 4 Posts
Take it in and get it professionally done, you will never get the rear thrust angle correct, if you have a good alignment guy he can get it it exactly on spec. and ask him to print out the results so you can check them. I am fortunate because I am a tech and have access to all the shop equipment, when I aligned my car and my sons car, they were both way out, way too much front and rear toe, and thrust angle out by a mile, easy to adjust live numbers on the rack so you can set rear toe and thrust perfectly, both cars are way more stable to drive, takes a bit more to initiate a turn but there is way less front end push into tight turns, and with stiffer sway bars in rear the back end snaps around alot easier.
 
Reply With Quote
  #5  
Old 12-07-2018, 08:02 AM
vetsvette's Avatar
vetsvette
vetsvette is offline
Moderator
iTrader: (5)
Join Date: Oct 2013
Location: South Central Virginia
Posts: 3,496
Thanked 284 Times in 229 Posts
I always get the Mini aligned with me sitting in the drivers seat. 250 pounds can make a difference.
 
Reply With Quote
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dpcompt
R56 :: Hatch Talk (2007+)
4
11-17-2008 07:03 PM
jtack
Suspension
3
10-12-2008 04:04 PM
OSUBeaver
PDX MINI Club
2
02-06-2008 02:04 PM
axelsanx
Tires, Wheels, & Brakes
1
11-21-2005 07:52 PM
gowest
Drivetrain (Cooper S)
23
04-26-2003 03:09 PM


Thread Tools
Search this Thread
Quick Reply: R56 rear alignment


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: