When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stock Problems/IssuesDiscussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).
I changed the brittle female connector from harness to coolant temp sensor on 2007 N12 manual. I forgot to mark which wire goes on which side on the connector. They are white and yellow. Are the wires interchangable? Does anyone have a picture to illustrate where the wires go in relation to the sensor connector? I looked online but could not find anything. Please see pic of how i reinstalled the wires, i hope its right! Thank you
Last edited by ansan12001; Feb 1, 2021 at 07:21 PM.
The DME measures the ohms of the sensor to determine temperature. So it shouldn't make a difference if the wires are reversed.
For what it's worth, the yellow goes to pin #1 and the white goes to pin #2. If you unplug it and look at the inside of the connector it will sometimes have them labeled.
