High fuel pressure at idle
Thread Starter
|
Neutral
Joined: Jan 2019
Posts: 9
Likes: 1
From: Plain City Ohio
High fuel pressure at idle
2013 1.6 turbo. I'm seeing 1,000 psi at the fuel rail according to the Torque app at about 700 rpm. I see 1,700 + at higher engine speeds.
I'm on the verge of getting a system rich code as the fuel correction exceeds -20 at times. This would seem to be a regulator issue, but I can't find any info on a regulator.
Is it built into the HPFP? I realize I could have a leaky injector but the pressure seems high by a couple hundred psi..
Thanks
I'm on the verge of getting a system rich code as the fuel correction exceeds -20 at times. This would seem to be a regulator issue, but I can't find any info on a regulator.
Is it built into the HPFP? I realize I could have a leaky injector but the pressure seems high by a couple hundred psi..
Thanks
Last edited by RCRacer; Feb 1, 2019 at 03:43 PM.
6th Gear
Joined: May 2018
Posts: 1,361
Likes: 246
From: Washington state
It doesn’t really sound too high iirc where mine usually sits at idle. I haven’t actually looked for a while. But it sounds like it’s in the right range.
That said, don’t listen to me! Ha ha
like I said I haven’t actually looked for a while and my memory is far from perfect. Someone else will be along to get another opinion from sooner or later.
That said, don’t listen to me! Ha ha
like I said I haven’t actually looked for a while and my memory is far from perfect. Someone else will be along to get another opinion from sooner or later.
Thread
Thread Starter
Forum
Replies
Last Post
ozmusafir
R56 :: Hatch Talk (2007+)
3
Dec 9, 2022 01:27 AM
Headlands
R55 :: Clubman Talk (2008+)
2
Apr 2, 2010 02:23 PM