Compression Test values
#1
Compression Test values
All
i have a 2012 Cooper R56 1.6L base. I am getting misfire on all cylinders while running.
Just purchased an OTC pressure gauge to do a compression test. I cannot find in the manual what the values are supposed to be, just that the compression should be 11:1.
My values where:
1: 230 / 220
2: 230 / 220
3: 210 / 230
4: 210 / 220
I am not sure these are correct. Other thread seem to have lower values. The values do seem consistent, so that is good ;-0
Any help would be appreciated. Going to try a leak down test this weekend.
Thanks in advance,
Tom
i have a 2012 Cooper R56 1.6L base. I am getting misfire on all cylinders while running.
Just purchased an OTC pressure gauge to do a compression test. I cannot find in the manual what the values are supposed to be, just that the compression should be 11:1.
My values where:
1: 230 / 220
2: 230 / 220
3: 210 / 230
4: 210 / 220
I am not sure these are correct. Other thread seem to have lower values. The values do seem consistent, so that is good ;-0
Any help would be appreciated. Going to try a leak down test this weekend.
Thanks in advance,
Tom
Thread
Thread Starter
Forum
Replies
Last Post
plasticknives
R50/R53 :: Hatch Talk (2002-2006)
5
04-03-2010 07:05 PM