Bonnet Heat/Deformed Scoop
5th Gear
Joined: Mar 2012
Posts: 1,091
Likes: 6
From: Jack Coffee Hays County, Republic of Texas
pmsummer...or anyone else who may be able to help...
I received my heat shield from Way Motor Works today but I'm having a bit of an issue installing it. If you look at the pic I posted of my hood you'll notice that in the center of the back side of the scoop opening there is a metal upright in the middle of the opening. The shield has a cut-out in the middle that I assume is supposed to fit around that metal piece. The problem is, the cut-out is only about 3/4" and the upright is over 1" wide. Can you tell on the one that you had installed by the dealer how wide the upright and cut-out are? The site said that there was no cutting necessary, but that doesn't appear possible unless I am totally missing something.
I received my heat shield from Way Motor Works today but I'm having a bit of an issue installing it. If you look at the pic I posted of my hood you'll notice that in the center of the back side of the scoop opening there is a metal upright in the middle of the opening. The shield has a cut-out in the middle that I assume is supposed to fit around that metal piece. The problem is, the cut-out is only about 3/4" and the upright is over 1" wide. Can you tell on the one that you had installed by the dealer how wide the upright and cut-out are? The site said that there was no cutting necessary, but that doesn't appear possible unless I am totally missing something.
5th Gear
Joined: Mar 2012
Posts: 1,091
Likes: 6
From: Jack Coffee Hays County, Republic of Texas
pmsummer...or anyone else who may be able to help...
I received my heat shield from Way Motor Works today but I'm having a bit of an issue installing it. If you look at the pic I posted of my hood you'll notice that in the center of the back side of the scoop opening there is a metal upright in the middle of the opening. The shield has a cut-out in the middle that I assume is supposed to fit around that metal piece. The problem is, the cut-out is only about 3/4" and the upright is over 1" wide. Can you tell on the one that you had installed by the dealer how wide the upright and cut-out are? The site said that there was no cutting necessary, but that doesn't appear possible unless I am totally missing something.
I received my heat shield from Way Motor Works today but I'm having a bit of an issue installing it. If you look at the pic I posted of my hood you'll notice that in the center of the back side of the scoop opening there is a metal upright in the middle of the opening. The shield has a cut-out in the middle that I assume is supposed to fit around that metal piece. The problem is, the cut-out is only about 3/4" and the upright is over 1" wide. Can you tell on the one that you had installed by the dealer how wide the upright and cut-out are? The site said that there was no cutting necessary, but that doesn't appear possible unless I am totally missing something.
3rd Gear
Joined: Apr 2012
Posts: 196
Likes: 0
From: Mission Viejo, CA
Definitely doesn't look the same as the backside of my scoop. It looks like the plastic grille in yours is right up against the opening...mine is recessed a bit. I'm out of town until Sunday, but I'll take a better pic when I get home.
Thread
Thread Starter
Forum
Replies
Last Post
Colt45Magnus
R56 :: Hatch Talk (2007+)
2
Oct 1, 2015 04:08 PM
jennster
Stock Problems/Issues
3
Sep 28, 2015 06:19 PM