SOLD:: BNIB unpainted GP wing (replica)
#1
BNIB unpainted GP wing (replica)
Category: Exterior
Price: $400
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R52, R53, R56
Location (Region): West
Item Condition: Brand New
Last edited by astroblack; 10-22-2018 at 11:31 AM.
#6
They still have one left for 375 including shipping. I guess cuz it's the last one and they don't make them anymore, sorry for the poop, but that's what they offered it to me. You also have to have a non S spoiler installed or won't work.
Ben
Ben
Trending Topics
#9
No sir, you have to take off your S spoiler use a none S for this spoiler to fit, none of this type spoilers will cover the Void, this spoiler will attach to inner hatch, you have to drill 2 on each side off the hatch to install.
#10
If you have an R53 you'll need to remove the stock spoiler and plug the two mounting holes in the hatch with covers or bodywork. MINI had factory covers for the JCW wing and the GP rep from the UK uses domed vinyl decals. FUbrication used to have an optional finned panel for the hatch (R50, R53 only??), but they are probably NLA.
For an R56, the spoilers and tops of the hatch are one unit so if you remove the S spoiler you have to replace the panel with a non-S panel/spoiler.
This is what an R56 hatch looks like when you remove the spoiler for clearance so the new wing will fit.
#12
With all that said, I'll do 375 shipped if there are no takers, too expensive to get it painted or wrapped, it just have to make stance. By the time your done it will be over $850 and for that you can get a painted one.
Ben
Ben
Thread
Thread Starter
Forum
Replies
Last Post