R61 Long time no see....
That car looks great!
The GP2 / 135i Sport brakes can be made to fit, just needs some rework of the caliper brackets:
https://www.northamericanmotoring.co...e-upgrade.html
The GP2 / 135i Sport brakes can be made to fit, just needs some rework of the caliper brackets:
https://www.northamericanmotoring.co...e-upgrade.html
Yep. can fit with 17" also it will be tight. Might need spacers. Nice Paceman.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
thank you!!! so they just need rework the bracket to fit? I wonder if there's any spec to that??
Trending Topics
Thank you!!! currently im running 18x8.5 with +35 offset, and those wheels are super light!! only weight like 18lb each. using ISC coilover, so far not too bad, but just wish I can access the rear adjustment easier. but gonna drill a hole later for easy access. oh and the tire size are 225/45/18
We've built a handful of R60 and R61s over the years and we actually had a custom Wilwood kit that we used on those builds that used some nice 6 piston red wilwood calipers. I believe we actually still have one kit left as we never sold enough to make a second run of brackets and hats for the R60
https://www.waymotorworks.com/wilwoo...n-paceman.html
then in the rear we did the simple larger rotors with the caliper brackets to fit as this keeps the factory parking brake working correctly, and still used the stock pads while filling in the look in the wheel.
https://www.waymotorworks.com/big-re...n-paceman.html
Otherwise the number of owners that modified R60s never came close to the number of R56s so there was never enough demand for companies to invest in the development of other options.
https://www.waymotorworks.com/wilwoo...n-paceman.html
then in the rear we did the simple larger rotors with the caliper brackets to fit as this keeps the factory parking brake working correctly, and still used the stock pads while filling in the look in the wheel.
https://www.waymotorworks.com/big-re...n-paceman.html
Otherwise the number of owners that modified R60s never came close to the number of R56s so there was never enough demand for companies to invest in the development of other options.
Wow! Not sure if you still have this (madmax88) but that looks great! Very tastefully done!
I had a 2015 R60 JCW manual in red but unfortunately it was written off parked in front of our home…sad day. Couldn’t find a replacement but found a manual 2018 F60 JCW in red, so bought that. Very different car…we like it but are now looking at a low mileage 2015 R61 JCW…in red of course….I saved lots of bolt on bits/mods from the R60….so hope to build up the Paceman. I like a lot of what you did to yours!
I had a 2015 R60 JCW manual in red but unfortunately it was written off parked in front of our home…sad day. Couldn’t find a replacement but found a manual 2018 F60 JCW in red, so bought that. Very different car…we like it but are now looking at a low mileage 2015 R61 JCW…in red of course….I saved lots of bolt on bits/mods from the R60….so hope to build up the Paceman. I like a lot of what you did to yours!
Thread
Thread Starter
Forum
Replies
Last Post
ny_yankee
1st Gen Countryman (R60) Talk (2010-2015)
24
Jan 3, 2013 08:03 AM












