R58 Has anyone installed a remote exhaust on their coupe?
Has anyone installed a remote exhaust on their coupe?
Just checking to see if anyone has installed any kind of remotely controlled exhaust system on their coupe. If so, which one?
I'm going to conclude that no one has done this! Controlling the exhaust note with a small remote while driving sounds like a good idea. I've seen some videos from Rhemus and I think the newer mini coopers have an option for a JCW sport exhaust with a Remote. The videos sound incredible.
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]Hi - I did some home work with Bob Bower @ Remus USA[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]The Remusuniversal [/SIZE][SIZE=3]exhaust comes with an integrated electrical valve that allowsyou to control the valve settings. You can have it fully closed, 10% open, 50%open and 100% and this is controlled by the hand held remote control.[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3] [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]The dimensions are: W:190xH:120xL:260 mm[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3] [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]The tips are about 7" but you can move them in and outto adjust to the diffuser accordingly.[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3] [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]The inlet pipe also a step connection depending on thediameter of the factory mid pipe. The inlet connections are 2"/2.25"/ and 2.5". [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]I had to place this on hold because of some health issues with my dad that I am trying to help him financially for now but Bob was super helpful
. this a universal unit that with some small mods will work. good luck , if you go that way and use it please give us all some feed back... [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]Thanks Joe Jimenez South Florida...
[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]My two cents [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]
[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]The Remusuniversal [/SIZE][SIZE=3]exhaust comes with an integrated electrical valve that allowsyou to control the valve settings. You can have it fully closed, 10% open, 50%open and 100% and this is controlled by the hand held remote control.[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3] [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]The dimensions are: W:190xH:120xL:260 mm[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3] [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]The tips are about 7" but you can move them in and outto adjust to the diffuser accordingly.[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3] [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT][FONT=Times New Roman][SIZE=3]The inlet pipe also a step connection depending on thediameter of the factory mid pipe. The inlet connections are 2"/2.25"/ and 2.5". [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]I had to place this on hold because of some health issues with my dad that I am trying to help him financially for now but Bob was super helpful
. this a universal unit that with some small mods will work. good luck , if you go that way and use it please give us all some feed back... [/SIZE][/FONT][FONT=Times New Roman][SIZE=3]Thanks Joe Jimenez South Florida...
[FONT=Times New Roman][SIZE=3]My two cents [/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]
[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3][/SIZE][/FONT]
Just text...
Hi - I did some home work with Bob Bower @ Remus USA The Remusuniversal exhaust comes with an integrated electrical valve that allows you to control the valve settings. You can have it fully closed, 10% open, 50%open and 100% and this is controlled by the hand held remote control.
The dimensions are: W:190xH:120xL:260 mm
The tips are about 7" but you can move them in and outto adjust to the diffuser accordingly.
The inlet pipe also a step connection depending on thediameter of the factory mid pipe. The inlet connections are 2"/2.25"/ and 2.5".
I had to place this on hold because of some health issues with my dad that I am trying to help him financially for now but Bob was super helpful
. this a universal unit that with some small mods will work. good luck , if you go that way and use it please give us all some feed back...
Thanks Joe Jimenez South Florida...
My two cents
The dimensions are: W:190xH:120xL:260 mm
The tips are about 7" but you can move them in and outto adjust to the diffuser accordingly.
The inlet pipe also a step connection depending on thediameter of the factory mid pipe. The inlet connections are 2"/2.25"/ and 2.5".
I had to place this on hold because of some health issues with my dad that I am trying to help him financially for now but Bob was super helpful
. this a universal unit that with some small mods will work. good luck , if you go that way and use it please give us all some feed back... Thanks Joe Jimenez South Florida...
My two cents
Go to Jegs.com and get an electric exhaust cutout for a Mustang (other size is too big) and slip it into your system way up near the front . Hook up your wiring and then make obnoxiously LOUD NOISE at the touch of a button. And if you want to be a REAL A55HOLE you can run a single pipe (right side only) with a FlameThrower kit installed. And then you can activate your on board bleachwater burnout kit . Do this at a local cruise nite just once so everyone can tell their friends that they "shulds bin dere". Been there, done that. Got the t-shirt AND the tattoo.
ISAMIN
ISAMIN
Go with side pipes in the scuttles LOL
Trending Topics
Yes, the newer models can be ordered with this....the guys on White Roof Radio rave about it. There's someone on NAM that has done this to a second gen, but I can't find the thread....not sure if it was Remus or not....seems like it was another vendor.
If you are talking about valvetronic exhaust yes, i have one fitted in my coupe Its A japanese exhaust company called Armytrix also my friend fitted FI exhaust on his. u can also fit IPE exhaust and Remus . All of them are valvetronic (comes with a remote on, off and auto).
Thread
Thread Starter
Forum
Replies
Last Post
Alpha Motoring
MINI Parts for Sale
7
Jun 1, 2016 07:16 PM
PelicanParts.com
Vendor Announcements
0
Mar 29, 2016 02:48 PM







