Last night I put a couple of S's on my side from CooperFlags....

I am waiting for the graphics to set a little more before I start working on them again....

just wondering on the full cure time of graphics.... as I have a few water or air bubbles in there still.... about maybe 1-3mm is diameter....

 

Not entirely sure, but I assume it can take several hours to cure. It looks good though.

 

no worries.... I had 3-4 in each one...

I just poked a little hole and just worked them out...

 

Wow that looks real sharp

 

It takes days of sunlight to cure out the bubbles. Anything larger than 1mm should be pricked with a sewing needle (not a knife! too big!) and gently squeezed out.