When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I responded to your other thread. That appears to be the connector to the "Start Inhibit Switch" on the transmission (CVT). Located on the back of the transmission, just above the pan. Number 4 on the diagram.
Hi sorry to say it's not the one from the gearbox the one one the gearbox is a 2 pin the one I have is a 4 pin plug
Are you sure you looked at the switch / sensor I was referring to? I know that's a 4 pin connector. It even shows the connector on the parts diagram titled "4 pole connector". The other connector on top of the transmission is different.
The connector is on the main engine harness, on the branch with the oil pressure switch and starter solenoid wires, it just keeps extending and reaches that switch on the transmission.
Here is a pic of the Start Inhibit Switch. You can see it has 4 pins.
You must be 100% correct and I can't see it but I trust your judgement and will take another look thanks again very much my friend you are a life saver
You must be 100% correct and I can't see it but I trust your judgement and will take another look thanks again very much my friend you are a life saver
Try to look from under the car, or in from the left side wheel housing, and you should see it.
It is possible I am mistaken, but based off your description and pics that should be it.