R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 Monza Pacesetter exhaust

Thread Tools
 
Search this Thread
 
  #1  
Old 06-07-2019, 10:22 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Monza Pacesetter exhaust

Howdy y'all. I've been look for a low budget exhaust that sounds good. I have a R53 Mini with some light mods. I just blew the baffles out of the exhaust I have (One Ball mod). I've settled on the Monza Pacesetter exhaust. Does anyone who has this exhaust system have any good video to share?
 
  #2  
Old 06-07-2019, 10:38 AM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
If you go to YouTube and type in Monza pacesetter r53 I think? There's a video there. I was going to get it but decided to go muffler delete with a nice tip for now just to have some sound while I stack parts in my closet for a weekend full of installations. The guy driving obviously didn't do a great job at letting her sing but it doesn't sound too bad.. as a matter of fact, here's the link.

 

Last edited by Paul Giraldo; 06-07-2019 at 05:07 PM.
  #3  
Old 06-07-2019, 10:53 AM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
I can upload a video of my muffler delete later if you'd like. I went single pipe from the mid pipe around the passenger side of the battery box then out the center with an odd oval tip. Audio quality over cell phones and YouTube aren't the greatest but I was super cautious about going muffler delete after hearing some of the videos on YouTube, turns out mine sounds great.
 
  #4  
Old 06-07-2019, 05:13 PM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts

I'm sorry for posting 3 times in a row like a straight up weirdo but I was just surfing the forums and found some complaints about the flex pipe on the pacesetter and some other bargain exhaust systems.. Apparently it's too short and users have been experiencing failures and leakage due to such. If you're looking for low budget I suggest going on Amazon or something and finding a tip you fancy. Take it to your local exhaust shop and have them delete the mufflers and weld the tip in place. Shouldn't be even $200 all together. My tip was like $50 super simple and the muffler delete was around $100
 
  #5  
Old 06-11-2019, 09:12 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Thank you for your reply

I'd like to hear you exhaust if you get the chance. I already have long tube racing headers with high flow cat. I like sound of the Pacesetter for their price. Later I'll go with a higher quality exhaust but for now I'm looking at budget
 
  #6  
Old 06-14-2019, 07:42 AM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
Sorry I've been so busy haven't even been on. I'll get a video of her later for you but it's going to sound much different as I still have the factory header and cat.
 
  #7  
Old 06-14-2019, 08:57 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
No problem. Anything will help in choosing the right exhaust system
 
  #8  
Old 06-16-2019, 07:12 PM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
Warm start:

Tunnel noise:

Regular driving:

I can get an aggressive acceleration video if you'd like. Girlfriend was too tired from traveling to help me out tonight 😴
 
The following users liked this post:
SlyCooper06 (06-21-2019)
  #9  
Old 06-16-2019, 07:48 PM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
It sounds great! What's the drone like?
 
  #10  
Old 06-17-2019, 03:10 AM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
The drone is actually not bad at all. Kept the cats and resonator obviously. It does get a little buzzy when you're cruising around 70-80 but it's not annoying and you're still more than able to carry a conversation with your passenger at a normal volume. I've had cars that were so loud you'd feel like you were yelling all the time. That's not the case here at all.
 
  #11  
Old 06-17-2019, 03:44 AM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
I didn't bother with that one ball mod madness. Cut at the midpipe where it's still single, ran "straight" pipe around the passenger side of the battery box and out the center. The pipe had to come into the exhaust tip at an angle because of the lack of room between the rear bumper and battery box so make sure you go somewhere that has a good reputation because it takes a little bit of creativity haha don't want your exhaust tip to be crooked. I don't know about you but that ish drives me crazy.
 
  #12  
Old 06-18-2019, 09:25 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Good to know. I've been considering moving the battery box help free up room in the back undercarriage.
 
  #13  
Old 06-18-2019, 09:27 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Along with blown baffles, I ran across this yesterday when the bolts broke loose traveling on a gravel road Sunday.
 
  #14  
Old 06-18-2019, 10:39 AM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
Oof. Practicing rx? 😂
 

Last edited by Paul Giraldo; 06-18-2019 at 02:14 PM.
  #15  
Old 06-18-2019, 05:58 PM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Ha! I wish. It's so loud I cringe every time I pass a State Trooper
 
  #16  
Old 06-20-2019, 12:18 PM
Brandon Williams's Avatar
Brandon Williams
Brandon Williams is offline
1st Gear
Join Date: Jun 2019
Location: wilkes-barre/scranton, williamsport PA
Posts: 13
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by Paul Giraldo
If you go to YouTube and type in Monza pacesetter r53 I think? There's a video there. I was going to get it but decided to go muffler delete with a nice tip for now just to have some sound while I stack parts in my closet for a weekend full of installations. The guy driving obviously didn't do a great job at letting her sing but it doesn't sound too bad.. as a matter of fact, here's the link.

https://youtu.be/kdc4Ujz0WjU
That guy driving was me wasn't trying to make it scream I wanted the tone to be heard not just it screaming
 
  #17  
Old 06-20-2019, 12:29 PM
Brandon Williams's Avatar
Brandon Williams
Brandon Williams is offline
1st Gear
Join Date: Jun 2019
Location: wilkes-barre/scranton, williamsport PA
Posts: 13
Likes: 0
Received 5 Likes on 5 Posts
Pace setter Monza exhaust

That is the link to a current video of the car I opened it up a little bit and let it sing this time
 
The following users liked this post:
Paul Giraldo (06-20-2019)
  #18  
Old 06-20-2019, 02:01 PM
ECSTuning's Avatar
ECSTuning
ECSTuning is offline
Platinum Sponsor
Join Date: Jan 2013
Location: Wadsworth, Ohio
Posts: 34,795
Received 1,965 Likes on 1,765 Posts
Originally Posted by SlyCooper06
Along with blown baffles, I ran across this yesterday when the bolts broke loose traveling on a gravel road Sunday.
Oh no :(
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
  #19  
Old 06-20-2019, 06:56 PM
Paul Giraldo's Avatar
Paul Giraldo
Paul Giraldo is offline
1st Gear
Join Date: May 2019
Posts: 50
Received 2 Likes on 2 Posts
Originally Posted by Brandon Williams
That guy driving was me wasn't trying to make it scream I wanted the tone to be heard not just it screaming

😂😂😂 I had a feeling when I had made the post that you might be lurking here. Second clip does sound way better. How are you doing with the flex section? Guessing it hasn't been an issue for you?
 
The following users liked this post:
SlyCooper06 (07-03-2019)
  #20  
Old 06-21-2019, 06:42 AM
Brandon Williams's Avatar
Brandon Williams
Brandon Williams is offline
1st Gear
Join Date: Jun 2019
Location: wilkes-barre/scranton, williamsport PA
Posts: 13
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by Paul Giraldo
😂😂😂 I had a feeling when I had made the post that you might be lurking here. Second clip does sound way better. How are you doing with the flex section? Guessing it hasn't been an issue for you?
Haven't had any problems with the flex pipe. I do have more videos I could post to youtube but videos don't do a justice how good it actually sounds. I will link them when I post them
 
  #21  
Old 06-21-2019, 06:52 AM
Brandon Williams's Avatar
Brandon Williams
Brandon Williams is offline
1st Gear
Join Date: Jun 2019
Location: wilkes-barre/scranton, williamsport PA
Posts: 13
Likes: 0
Received 5 Likes on 5 Posts
Here's another video of my car with my buddy driving just letting off the gas in 1st leaving it in gear then 1st to 2nd shifting
 
The following users liked this post:
SlyCooper06 (06-21-2019)
  #22  
Old 06-21-2019, 09:14 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Originally Posted by Brandon Williams
https://youtu.be/M6ALeov_YFk
Here's another video of my car with my buddy driving just letting off the gas in 1st leaving it in gear then 1st to 2nd shifting

Is it pretty loud with the cats and stock header or is it a comfortable tone? Right now, the straight headers I'm running are loud until I get it fixed. I love noise but I like to be able to hear too
 
  #23  
Old 06-21-2019, 09:16 AM
SlyCooper06's Avatar
SlyCooper06
SlyCooper06 is offline
1st Gear
Thread Starter
Join Date: May 2019
Location: Texas
Posts: 12
Received 0 Likes on 0 Posts
Originally Posted by Brandon Williams
https://youtu.be/T3Lx4GgjpcU
That is the link to a current video of the car I opened it up a little bit and let it sing this time
Much better sound
 
  #24  
Old 06-21-2019, 07:02 PM
Brandon Williams's Avatar
Brandon Williams
Brandon Williams is offline
1st Gear
Join Date: Jun 2019
Location: wilkes-barre/scranton, williamsport PA
Posts: 13
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by SlyCooper06
Is it pretty loud with the cats and stock header or is it a comfortable tone? Right now, the straight headers I'm running are loud until I get it fixed. I love noise but I like to be able to hear too
It's deffinetly not as loud as some other r53's I've heard and for me it's comfortable you are still able to hear your self think and there is drone on the highway around 70 but it's not that bad if you have your rear seats up and some things in the trunck to block sound and yes I still have stock header and cats
 
The following users liked this post:
SlyCooper06 (06-22-2019)
  #25  
Old 04-26-2020, 08:34 PM
James Kasper's Avatar
James Kasper
James Kasper is offline
Neutral
Join Date: Apr 2020
Posts: 2
Received 0 Likes on 0 Posts
Installation?

Do you know if this fits an 04? Lol. It doesn't look like the muffler will fit. Did you run into any issues?
 


Quick Reply: R50/53 Monza Pacesetter exhaust



All times are GMT -7. The time now is 10:13 AM.