R50/53 Early gas "door" swap
Thread Starter
|
5th Gear
Joined: Mar 2018
Posts: 795
Likes: 122
From: SoCal
Early gas "door" swap
I tried the search function, unhelpful.
Question one - Does any one know, is it possible to put the early gas "door" on a later (2005) car ?
Question two - Does anyone know, is the early door still available ?
Mike
Question one - Does any one know, is it possible to put the early gas "door" on a later (2005) car ?
Question two - Does anyone know, is the early door still available ?
Mike
Do you mean a “regular” painted gas door when referring to an early gas door? In general the painted gas doors were on the non S R50 MINI’s and the exposed and recessed chrome “fuel cap” doors were on the S. The caps and associated trim assemblies are interchangeable between the two so you can get the look you prefer, except on the convertibles. Convertibles can only have the painted doors as the recessed trim required for the chrome gas cap door interferes with the folding top assembly.
https://www.ecstuning.com/b-genuine-...51170403076kt/
This is the Cooper to Cooper S conversion, will not fit on the r52 convertible.
51170403076
This is the Cooper to Cooper S conversion, will not fit on the r52 convertible.
51170403076
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread Starter
|
5th Gear
Joined: Mar 2018
Posts: 795
Likes: 122
From: SoCal
ECS Tuning -
Thanks for the search, but I want to go the other way.
I'd like to smooth things up a bit by removing the chrome cap (on S cars) and put the "cheaper" (?) door in place of the chrome cap.
Is this what I want (from your site) ? -
Hinge - 51177033498
Door - 51177061286
Mike
Thanks for the search, but I want to go the other way.
I'd like to smooth things up a bit by removing the chrome cap (on S cars) and put the "cheaper" (?) door in place of the chrome cap.
Is this what I want (from your site) ? -
Hinge - 51177033498
Door - 51177061286
Mike
Last edited by OCR; Aug 14, 2018 at 02:31 PM.
2nd Gear
Joined: Jan 2017
Posts: 51
Likes: 2
From: MidWest/EastCoast
Like it, I'm actually working on the same thing now. Only, possibly making an adapter to put the "flush" cover onto the "S" hinge assembly.
Banned
Joined: Sep 2017
Posts: 442
Likes: 38
From: NCAL
Trending Topics
Ok, That looks like just it, I was looking at the old kit and the gas filler neck mounts into that lid cap section, then you just have the door. If you do the mod, post up. I have that set up on my R52 Cooper as it was stock. People back in the day always wanted the chrome cap look on there R52 Convertible and there was never a kit for that. 
The cap hinge cover comes primed and its like a quick turn and it snaps onto the door. Make sure its twist and tight.
The cap hinge cover comes primed and its like a quick turn and it snaps onto the door. Make sure its twist and tight.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; Aug 15, 2018 at 02:13 PM.
You are welcome. Must have added a bunch it should have been like ~ $90
my name is Mike also, great name.
my name is Mike also, great name.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread Starter
|
5th Gear
Joined: Mar 2018
Posts: 795
Likes: 122
From: SoCal
Finally got all the parts. Painted the door, (too much clear on one edge !).
Started the swap last night, didn't get very far, could not get the inner liner out. Looked online, found instructions, got it completed this morning, takes a few minutes, but a very easy swap.
The paint color even matches nicely. I had it made up at a paint shop.
I like the simple/clean look.
Mike
Started the swap last night, didn't get very far, could not get the inner liner out. Looked online, found instructions, got it completed this morning, takes a few minutes, but a very easy swap.
The paint color even matches nicely. I had it made up at a paint shop.
I like the simple/clean look.
Mike
Thread Starter
|
5th Gear
Joined: Mar 2018
Posts: 795
Likes: 122
From: SoCal
Haven't taken pictures of my interior rear view mirror swap yet either. That would be more interesting.
A smaller, bond on (bonded onto the windshield) mirror, and a cut-up second mirror that's now the shape of a tear-drop to cover the big hole in the headliner. Much more viewing area out the windshield now.
I'll get some shots for posterity one of these days...
Mike
A smaller, bond on (bonded onto the windshield) mirror, and a cut-up second mirror that's now the shape of a tear-drop to cover the big hole in the headliner. Much more viewing area out the windshield now.
I'll get some shots for posterity one of these days...
Mike
4th Gear
Joined: Jun 2018
Posts: 402
Likes: 77
From: SoCal
My interior rear view mirror swap was a little more than I bargained for
https://www.northamericanmotoring.co...ml#post4413523
https://www.northamericanmotoring.co...ml#post4413523
Thread Starter
|
5th Gear
Joined: Mar 2018
Posts: 795
Likes: 122
From: SoCal
Yea, I "think" my original mirror has the small single PC board in it.
The mirror I cut up, did have the small single PC board in it.
I thought about pulling the board out of my original mirror...I didn't, I'm fine with using the key, as a key to unlock the doors.
Mike
The mirror I cut up, did have the small single PC board in it.
I thought about pulling the board out of my original mirror...I didn't, I'm fine with using the key, as a key to unlock the doors.
Mike
6th Gear
Joined: Sep 2017
Posts: 1,515
Likes: 255
https://www.ecstuning.com/b-genuine-...51170403076kt/
This is the Cooper to Cooper S conversion, will not fit on the r52 convertible.
51170403076
This is the Cooper to Cooper S conversion, will not fit on the r52 convertible.
51170403076
Bryan
Thread
Thread Starter
Forum
Replies
Last Post
Interior/Exterior Scratch Guards, Door Handles, Gas Cap Surround, and a Gas Cap
JaysinStrife
Interior/Exterior
0
Jun 23, 2015 04:29 PM