When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Take handle off and check connection? I had a similar problem. When it rained moisture would get into the hatch switch and it wouldn't open till it dried out. Dealer fixed it by replacing the assembly.
next thing is that I can't find the emergency hatch release ring that is suppose to be in the back seat, as described in the owners manual. If it helps it is a 2002 manual Mini cooper base
On MOST gen1 cars, if you reach under the rear seat, there is a vable that will manually pull the latch open....
The button that opens the latch electrically might have gone bad....or some water got to it....you can take it apart..use some contact cleaner..or even replace the handle.
Grab the front of the seat and give it good tug upwards. It's just held down with a few clips, so you don't have to worry about breaking anything. There should be a yellow handle on a long wire. You can't miss it.
I remember reading somewhere that the early gen 1's did not have that release cable.. could this be why he can't locate it? I would hope this wouldn't be the case though!
I remember reading somewhere that the early gen 1's did not have that release cable.. could this be why he can't locate it? I would hope this wouldn't be the case though!
That's right .... my 02-S which I bought in October off the delivery truck was a late Aug build as I recall and it did not have the release