R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 Please Help......non-interference or interference??

Thread Tools
 
Search this Thread
 
Old Oct 14, 2011 | 02:07 PM
  #1  
RobRuz's Avatar
RobRuz
Thread Starter
|
Neutral
Joined: Oct 2011
Posts: 9
Likes: 0
Please Help......non-interference or interference??

Is my 2006 Mini Cooper S a interference Engine or NON-interference ???

Thanks in advance
 

Last edited by RobRuz; Oct 14, 2011 at 03:29 PM.
Reply
Old Oct 14, 2011 | 05:43 PM
  #2  
miniblucabrio's Avatar
miniblucabrio
5th Gear
iTrader: (1)
Joined: Oct 2008
Posts: 796
Likes: 8
From: Lemoore, CA
I recently found out these are not interference motors.
 
Reply
Old Oct 15, 2011 | 05:58 AM
  #3  
cristo's Avatar
cristo
Alliance Member
20 Year Member
Liked
Loved
Joined: Apr 2003
Posts: 4,098
Likes: 229
From: York, Pennsylvania
How about the R50 (with higher compression ratio, more likely to be an interference engine than the R53)?
 
Reply
Old Oct 15, 2011 | 07:12 AM
  #4  
RobRuz's Avatar
RobRuz
Thread Starter
|
Neutral
Joined: Oct 2011
Posts: 9
Likes: 0
Thank the Lord.........Just had timing Chain and Tensioner problem..........Literally stopped working on the highway...

So the odds look a lot better now. I really hope i dont need a new motor.
 
Reply
Old Oct 15, 2011 | 07:38 AM
  #5  
nabeshin's Avatar
nabeshin
Functioning Lunatic
iTrader: (2)
Joined: Sep 2006
Posts: 5,237
Likes: 6
From: Lincoln, NE
You'd definitely hear it if the valves were hit.
 
Reply
Old Oct 16, 2011 | 12:14 AM
  #6  
MinimouseR53's Avatar
MinimouseR53
1st Gear
Joined: Sep 2011
Posts: 20
Likes: 1
Very Very good to hear that the R53 is a non interference motor. Makes sense, being such a low compression motor.

Makes me love our Mini!
 
Reply
Old Oct 16, 2011 | 09:04 AM
  #7  
miniblucabrio's Avatar
miniblucabrio
5th Gear
iTrader: (1)
Joined: Oct 2008
Posts: 796
Likes: 8
From: Lemoore, CA
Just had the chain, tensioner, guides, and oil pump replaced on mine. Caught it before it failed completely. Keep us posted on how yours works out.
 
Reply
Old Oct 19, 2011 | 02:48 PM
  #8  
RobRuz's Avatar
RobRuz
Thread Starter
|
Neutral
Joined: Oct 2011
Posts: 9
Likes: 0
well mini is still in the shop..............getting pretty upset with this whole thing. I JUST bought it (used) but it was only 4 days old!!! :( its been in the shop more days than i have drove it.....
But now im getting mixed responses to my question. 1 Mini dealer in my area says NON-interference, Miniblucabrio says its NON Interference, but now 2 Mini dealerships told me ALL minis are Interference. I'm LOSING my mind while its in the shop getting worked on. I find out 2moro if there was Valve damage.
I was driving 120kms/hr while this happened. I didnt hear anything "bad" so lets pray everythings good.......... I'll keep you posted.
 
Reply
Old Oct 19, 2011 | 06:22 PM
  #9  
miniblucabrio's Avatar
miniblucabrio
5th Gear
iTrader: (1)
Joined: Oct 2008
Posts: 796
Likes: 8
From: Lemoore, CA
The R56 motors are interference. Luckily I caught mine before it broke but it was still a pricey repair bill Hope yours is okay and there isn't any other internal damage.
 
Reply
Old Oct 20, 2011 | 12:46 PM
  #10  
RobRuz's Avatar
RobRuz
Thread Starter
|
Neutral
Joined: Oct 2011
Posts: 9
Likes: 0
WELL, today i found out that the car wont start... (after they put the timing chain ack on) during a compression test 2 cylinders were at 30ish and 2 were at 60ish............Does that mean ALL the valves are done????? or could the timing be not set properly. Its not at MINI, my warranty people wouldnt let me take it to them. Im freaking out.
 
Reply
Old Oct 21, 2011 | 01:06 PM
  #11  
RobRuz's Avatar
RobRuz
Thread Starter
|
Neutral
Joined: Oct 2011
Posts: 9
Likes: 0
OH BTW , 10 valves bent!!!!!!!!!!!!!!!!!! OMG , i think im gunna be sick..... :(
 
Reply
Old Oct 21, 2011 | 01:07 PM
  #12  
RobRuz's Avatar
RobRuz
Thread Starter
|
Neutral
Joined: Oct 2011
Posts: 9
Likes: 0
so i guess this answered my question ...... interference or non-interference???? DEFINITELY INTERFERENCE......... im sooooooo upset right now.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
simron
MINI Parts for Sale
2
Sep 23, 2015 10:02 PM
WillShootPhotos
R56 :: Hatch Talk (2007+)
6
Sep 14, 2015 07:50 AM
Sc00terbum
R50/R53 :: Hatch Talk (2002-2006)
6
Sep 11, 2015 07:17 AM
AZN Optics
Accessory Products
0
Aug 21, 2015 02:03 PM
AZN Optics
Interior/Exterior Products
0
Aug 21, 2015 02:02 PM




All times are GMT -7. The time now is 04:23 AM.