Updated as of July 07, 2004

The Party is ON! Saturday is full! ONLY 2 Slots Remain!

Sunday at 2pm and at 3:30pm

When: July 24th and July 25th

Location and MAP: 111 Collimore Road, East Hartford CT

We will have a 2 car garage in a private home, and a bar-b-q going so show up even if you are not getting any work done.

If you have not already done so, please give Randy a call to arrange payment options and to pre-order all non pulley parts.


Updated Time Slots for July 24, July 25ths Pulley Party!

Saturday, July 24th

8:00
MoreFun (Alta 15% pulley)

9:30
Holdenontoit (15% pulley)

11:00
jurni (Alta 15%, Alta CAI)

12:30
Bungle77 (pulley, unichip)

2:00
Actual Size (pulley)

Sunday, July 25th

8:00
memojo (15%, iridium plugs)

9:30
Blue Brummie (Alta 15%, Unichip)

11:00
pbraun (15% pulley, Webb ECU, Blue Kingsb. wires, Alta Catch, IK-22 set)

12:30
nomonsterinme (pulley)

2:00


3:30


-----

On the fence: Ace and GMINI




Link to Randy's page and more details:
http://www.webbmotorsports.com/forums/viewtopic.php?p=5394#5394

Thanks!


_________________
'04 MCS DS/B PP,SP,CWP, HK, leather, Rear Fogs

 

Personally ... no

There was a Cape Cod party last year (?) and a number of Boston locals went down so there may not be many people left still wanting ...

 

>>Anyone interested? Bisch are you around??

Just so i know what i'm signing on for, what is the cost for this, a la pulley party? My oldest son is getting married on the proposed july 10, but if it was a couple of weeks later I would be interested.By then ,my warrentee should be over .Hmmm,.........15%,17%,19%???

 

If Randy Webb does the install, the cost is $400 complete. There are also several other upgrades available at his pulley parties. A complete list and the associated costs can be found at his "Webb" site.

http://www.webbmotorsports.com/forum...0ef89c0f0782ab

 

>>Personally ... no :smile:


You make a good point, Ian, there might not be many waiting, but considering jsun's post, I too see SO many Mini's in Boston, that there might be a few lurking around on this board (and not posting)


We have three people who have shown some interest. (posted on Randy's WEBB Page )

All we need is 10 people total. Anyone else interested?





_________________
'04 MCS DS/B PP,SP,CWP, HK, leather, Rear Fogs

 

Ian does have a good point, but remember, only 20 or so MINI owners were involved in the earlier Party. I'm guessing we've got quite a few more owners interested in getting the pulley.

Even still, Hartford might not be a bad alternative if we can't get 10 people to sign up.

I'm up for it. (Pulley, Alta CAI and Unichip)

BB

 

Date Changed to July 17th Weekend! We need just 6 more people.


Disco Dan
Blue Brummie -> Unichip, and Alta CAI
Holdenontoit
jurni -> Alta CAI


>>
>>>>Anyone interested? Bisch are you around??
>>
>>Just so i know what i'm signing on for, what is the cost for this, a la pulley party? My oldest son is getting married on the proposed july 10, but if it was a couple of weeks later I would be interested.By then ,my warrentee should be over .Hmmm,.........15%,17%,19%???
>>

 

I'm pretty interested in a Hartford event and I think I might be able to bring another S driver with me. Let me see if I understand the concept though: A group of us meet somewhere and all get the conversion done on the same day, but because there are so many of us we get a reduced rate on the hardware and installation fee, yes?
Also - I see the Powership and EVOTech software, but no Unichip on Randy's site. I guess I'm missing something here.
_________________
Pure Silver/Black MCS; Promini Intake -
I am always ready to learn, although I do not always like being taught. -Winston Churchill

 

Don't put me down for anything right now as most of the work has been done to my car. Unless the front mount intercooler is ready by then! I will just come down and hang out.

Cheers,

JD

 

Hey Jurni,

Have you posted on MINI2 to see if we can get anyone else interested ?

BB

 

>>
>>Also - I see the Powership and EVOTech software, but no Unichip on Randy's site. I guess I'm missing something here.
>>_________________
>>Pure Silver/Black MCS; Promini Intake -
>>I am always ready to learn, although I do not always like being taught. -Winston Churchill

The Unichip is available from Randy, he just hasn't updated his web site yet. He was instrumental in the development of the chip for the MINI.

 

Hey Jurni,

Hope you don't mind, but I just posted some info about the Pulley Party over on MINI2 in the NY/NE forum.

After having seen Randy work, I am definitely excited about making sure this Party happens.

BB

 

>>Anyone interested? Bisch are you around??
>>
>>
...here I am.
If a location is needed...I can do it again. Let me know.

 

Thanks, Bisch! Pleas do look into it. I'll follow my leads in CT and we can all pick on the best location. Thanks for your offer!

 

Interest so far (we need 10!!!) (pulley assumed, extras noted)


Disco Dan
Blue Brummie -> Unichip, and Alta CAI
Holdenontoit
jurni Alta -> Alta CAI
CTMINI (thinking about it.)
gt6 (thinking about it)
LordWinslow (thinking about it)

 

Add me to the list .

 

>>Add me to the list .

mwcoop, where do you live? What do you want done?

Disco Dan
Blue Brummie -> Unichip, and Alta CAI
Holdenontoit
jurni Alta -> Alta CAI
mwcoop
CTMINI (thinking about it.)
gt6 (thinking about it)
LordWinslow (thinking about it)

 

Sorry. just a pulley for now. :smile: Live in SALEM. MA.

 

cool MWcoop! Glad you can join us! This is shaping up to be a good turn out!

 

ATTENTION!!!!

ATTENTION!!!!

Unfortunately, due to unforseen circumstances, my facility will not be available for a pulley party this summer.

My apologies.

Tim

 

Thanks Bisch for your wonderfull offer. We hope you can still make it down to the party and hang out... We'd love to check out that 19% you are running!

 

disco here. sorry guys but i'm gonna have to back out of this one. as much as i want to meet Randy and all the rest of you guys, i can't get the day off of work, and that Sunday i have a family party i have to attend. as much as i want the Alta pulley for the bling factor, Eric at Helix is a very nice guy and he had an opening that worked out for me. again sorry guys, i feel real bad. don't hate me.

 

I am interested in the Hartford thing.

Any size pulley?

Final price for just pulley...

Randy Webb is doing install?

 

I think Randy only does thr 15%... The price has been $400 in the past and if you purchase the CAI, he used the throw in the install. Randy Webb would be the person performing the install.

I have placed a call in to randy and I will post time slots once he gets back to us.

Thanks for your interest! I'll put you done as "on the Fence"

 

Only interested if I can get the 17%...