Need Powder Coating Work in Denver?
Need Powder Coating Work in Denver?
I found a great place for powder coating over by the Oxford station off Santa Fe:
Pristine Powder Coating
3768 S Lipan St
(720) 488-5499
The guy's name is Lee and he is very nice, willing to experiment and spend time talking with you. I was wondering if I could powder coat some of the plastic bits under the bonnet and he was willing to give it a try (BTW - you can't because they warp). The other places I called would hardly even talk with me. He said he will look into some lower temp material to see if that will work (340 deg F @ 10 min instead of 400 deg F @ 20 min).
Anyway he had some wheels in there that he was working on - a nice glossy charcoal gray with metallic that looked really nice - $45/wheel! That is very cheep.
So if you need powder coating done give Lee a call and tell him you have a MINI - he said he loves them.
Chuck
Pristine Powder Coating
3768 S Lipan St
(720) 488-5499
The guy's name is Lee and he is very nice, willing to experiment and spend time talking with you. I was wondering if I could powder coat some of the plastic bits under the bonnet and he was willing to give it a try (BTW - you can't because they warp). The other places I called would hardly even talk with me. He said he will look into some lower temp material to see if that will work (340 deg F @ 10 min instead of 400 deg F @ 20 min).
Anyway he had some wheels in there that he was working on - a nice glossy charcoal gray with metallic that looked really nice - $45/wheel! That is very cheep.
So if you need powder coating done give Lee a call and tell him you have a MINI - he said he loves them.
Chuck
Last edited by MiniMaybee; Nov 16, 2007 at 06:07 PM.
4th Gear
Joined: Dec 2006
Posts: 362
Likes: 0
From: Colo. Springs
For anyone S. of Denver....I have used Advanced Powder Coating in Colorado Springs. They did my 18" wheels to a 40% gloss black for $45.00 each. The sandblasting of the old finish is quoted seperately due to variation mfgr/mfgr.
6th Gear
Joined: Sep 2005
Posts: 1,155
Likes: 0
From: Colorado Springs
Anyone know anyone who does beadblasting? Not MINI parts, but I have a bird cage that I need to have powdercoated. 
Trending Topics
4th Gear
Joined: Dec 2006
Posts: 362
Likes: 0
From: Colo. Springs
Brihyana:
Advanced Powder Coating in C/S can beadblast & Powder Coat.
Advanced Powder Coating, Inc.
Dean Toth
2065 Aeroplaza Dr.
Colo. Springs, CO. 80916
719-391-4967
www.advancedpci.com
Advanced Powder Coating in C/S can beadblast & Powder Coat.
Advanced Powder Coating, Inc.
Dean Toth
2065 Aeroplaza Dr.
Colo. Springs, CO. 80916
719-391-4967
www.advancedpci.com
Thread
Thread Starter
Forum
Replies
Last Post
The_Kid
R50/R53 :: Hatch Talk (2002-2006)
10
Aug 18, 2015 03:12 PM
Drivetrain removing heat shields for turbo cat ?
rckrzy1
Drivetrain (Cooper S)
4
Aug 11, 2015 06:06 PM
