When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Category: Lights Price: $550 Private or Vendor Listing: Private Listing Part fits (you may select multiples): R55, R56, R57, R58, R59 Location (Region): NorthEast Item Condition: Used
Looking to sell my headlights with all upgraded internals, just changing things up with my car, they are in great condition and a solid upgrade over the factory xenon headlights, these will be plug and play for the factory Xenon headlights but might throw a bulb error due to the LED bulbs. Currently the day time running lights are not wired to be used as the signal light but that can be changed if they buyer is interested. Headlights were blacked out on the inside. Headlights were purchased from ECS tuning and retrofit parts were purchased from The Retrofit source. Looking to get 750$ plus shipping.... Price dropped to 550!
I noticed you said these are plug and play if you already have factory Xenon's but what if you have halogens, will these lights still work?
I'm trying to figure out what I need to convert my halogen headlight set up to be Xenon and don't know all the different playing parts I need to have so I wont have any codes.
I noticed you said these are plug and play if you already have factory Xenon's but what if you have halogens, will these lights still work?
I'm trying to figure out what I need to convert my halogen headlight set up to be Xenon and don't know all the different playing parts I need to have so I wont have any codes.
So for these to work for a halogen vehicle the wiring will need to be changed. And it’s only 1 plug for the high beams. This is only based on assumptions as I just built another set of headlights for my car which were designed to work for halogens cars. One plug needs to be moved so that the high beam can work. Everything else is the same.
Where are you located....I have a 2011 Mini Clubman S these should fit.
Also how many connections for plug and play?
thanks
So the headlights will be plug and play, might possibly throw an error for the led then bulbs. But to have the parking lights work you will need to tap into the parking light for that to work. Either side marker. Or the bulbs above the fogs
Originally Posted by Beka_2JZ
BUMP.
Hey Man You've Got The BEST LOOKING R56 Cooper S, I have EVER Seen !!!
So the headlights will be plug and play, might possibly throw an error for the led then bulbs. But to have the parking lights work you will need to tap into the parking light for that to work. Either side marker. Or the bulbs above the fogs
Thank you
I've been following this thread for a while, surprised no one has bought these yet! I think I have a set of these, since my lights look familiar. Not naming the company, so OP has a chance to sell these awesome lights.
Regarding the halos/eyebrows function, OP is right, you will have to tap into the parking lights, which are actually the lights above the fogs. I didn't realize the wheel arch lights would work too, which might've been easier actually...
The wires for the halos/eyebrows on my lights were plenty long enough to reach the parking lights, and should be long enough to reach the wheel arch lights. Wire taps should work fine.
The odd part is that I couldn't get my halos/eyebrows to light up with the headlights until I tapped the wires. OP seems to have the halos/eyebrows lit in the pictures though?
Yes, you can run the halos without the headlights on (headlight stalk, 1 click)
