R56 :: Hatch Talk (2007+) MINI Cooper and Cooper S (R56) hatchback discussion.
Sponsored by:
Sponsored by:

detroit tuned vs out motoring oil line kits

Thread Tools
 
Search this Thread
 
Old Jul 16, 2019 | 06:33 PM
  #1  
Ray167's Avatar
Ray167
Thread Starter
|
2nd Gear
Joined: Aug 2017
Posts: 76
Likes: 4
From: Toronto, Canada
detroit tuned vs out motoring oil line kits

Hi everyone, I was wondering if anyone has experience with both of the oil line kits that come from Detroit tuned and out motoring. The only difference I notice is that the out motoring kit has a black rubber looking line vs detroit tuned steel braided line. Links below.

https://www.detroittuned.com/dt-turb...ine-super-kit/

https://www.outmotoring.com/MINI-Coo...2012-2013.html

Thanks.
 
Reply
Old Jul 17, 2019 | 05:39 PM
  #2  
AZdsrt's Avatar
AZdsrt
6th Gear
Joined: Jun 2013
Posts: 1,567
Likes: 57
From: Scottsdale, AZ
I suspect both are OK, however there are a lot threads here recommending the Detroit Tune kit..
 
Reply
Old Jul 17, 2019 | 05:52 PM
  #3  
Ray167's Avatar
Ray167
Thread Starter
|
2nd Gear
Joined: Aug 2017
Posts: 76
Likes: 4
From: Toronto, Canada
I have only seen Detroit tune used on this forum and that is why I asked the question. There is also the $55 difference between the two kits which is quite a savings since I will be using Canadian pesos to make the purchase.
 
Reply
Old Jul 18, 2019 | 05:52 AM
  #4  
ethanjlee96's Avatar
ethanjlee96
1st Gear
Joined: Jul 2019
Posts: 14
Likes: 2
From: Toronto
It might be hard to find someone who has tried both. Detroit Tuned is pretty active on the forum and people gravitate to the tried and true fixes. If you're feeling adventurous, you could look at putting together your own oil line. www.jrponline.com in Mississauga carries Vibrant lines and fittings. I haven't put one together yet, but when my turbo line becomes an issue, I probably will. Shipping from Detroit Tuned plus the fact that they only accept PayPal (who charges a fee for dollar conversions) really affects the affordability of their kit.

https://vibrantperformance.com/catal...php?cPath=1529
 
Reply
Old Jul 19, 2019 | 11:57 AM
  #5  
Detroit Tuned's Avatar
Detroit Tuned
Vendor - 15 Years
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
Joined: Feb 2003
Posts: 1,754
Likes: 36
From: Metro Detroit Area, Michigan
We have seen and tested all the kits out there. We still feel ours is the best. On some of the cheaper lines, the heat shrink finish to the ends melt off and donot look the best. I know our line has the best wear/rub protection out there and as it bends and feeds to the block that is important. Also, we use a 30 deg and 90 deg ends for best clearances, not a straight and a 90. All the best options for a line being pressurized with hot oil. We also have a Canadian friend that we see a few times a year that can bring parts north. We always stay on top of all of our products to refine as needed and upgrade things. Check our FB or IG page for some of the failures. The best kit out there: https://www.detroittuned.com/detroit...ine-super-kit/
 
__________________
https://www.northamericanmotoring.com/gallery/data/500/sig36.jpg
www.detroittuned.com ...Making MINIs faster since 2004 Who is DT??? FaceBook



Last edited by Detroit Tuned; Aug 19, 2021 at 07:50 AM.
Reply
Old Jul 20, 2019 | 12:20 PM
  #6  
3lusive's Avatar
3lusive
5th Gear
iTrader: (2)
Joined: Nov 2011
Posts: 950
Likes: 53
From: Sacramento, CA
Can't go wrong with the detroit tuned kit, I installed it on my old mini and was very happy I chose it. I sold the car a couple months after so I don't know how it's holding up but based on the build quality I would expect it to last
 
Reply
Old Jul 21, 2019 | 10:09 PM
  #7  
Ray167's Avatar
Ray167
Thread Starter
|
2nd Gear
Joined: Aug 2017
Posts: 76
Likes: 4
From: Toronto, Canada
Great thanks, I appreciate all the input guys.
 
Reply
Old Jul 22, 2019 | 03:00 AM
  #8  
knt's Avatar
knt
3rd Gear
Joined: Dec 2018
Posts: 268
Likes: 37
I've used detroit tuned turbo oil line many years without any problems.
 
Reply
Old Aug 2, 2019 | 07:34 AM
  #9  
CoolHands's Avatar
CoolHands
1st Gear
Joined: Dec 2017
Posts: 32
Likes: 9
From: London, UK
My problem is I’m in the uk and it just seems too difficult to order from detroit tuning. No shipping is shown and you have to email them etc + pay additional 4.5% to use paypal?
 
Reply
Old Aug 12, 2019 | 09:12 PM
  #10  
Yoshimura 1's Avatar
Yoshimura 1
5th Gear
5 Year Member
Liked
Joined: May 2018
Posts: 1,053
Likes: 73
Those are some good looking lines
 
Reply
Old Aug 13, 2019 | 04:17 PM
  #11  
Ray167's Avatar
Ray167
Thread Starter
|
2nd Gear
Joined: Aug 2017
Posts: 76
Likes: 4
From: Toronto, Canada
I just got the kit yesterday and I am going to install today. The only thing that is different from the Detroit kit is the regular oil line instead of the oil braided line. Lets see how it holds up.
 
Reply
Old Aug 13, 2019 | 09:03 PM
  #12  
E34M5's Avatar
E34M5
3rd Gear
Joined: Nov 2010
Posts: 275
Likes: 41
From: Richmond B.C.
To avoid any catastrophic failures if your going to track your car I would reroute/modify the line as outlined in this post (mine)
https://www.northamericanmotoring.co...lure-fire.html
 
Reply
Old Aug 13, 2019 | 10:27 PM
  #13  
Ray167's Avatar
Ray167
Thread Starter
|
2nd Gear
Joined: Aug 2017
Posts: 76
Likes: 4
From: Toronto, Canada
Originally Posted by E34M5
To avoid any catastrophic failures if your going to track your car I would reroute/modify the line as outlined in this post (mine)
https://www.northamericanmotoring.co...lure-fire.html
Well that is very scary, but I don't think I will be tracking the car other than some spirited driving. Did you have a turbo blanket by any chance? I am going to get one and also I am going to wrap my new downpipe to keep all the heat in. Also does your new oil line have some sort of sleeve on it?

Thanks
 
Reply
Old Aug 2, 2021 | 01:31 PM
  #14  
CoolHands's Avatar
CoolHands
1st Gear
Joined: Dec 2017
Posts: 32
Likes: 9
From: London, UK
.
 

Last edited by CoolHands; Aug 5, 2021 at 03:43 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
I_Forge_KC
Drivetrain (Cooper S)
2
May 20, 2019 05:08 PM
Gabe3
Stock Problems/Issues
52
Apr 25, 2017 01:00 PM
ECSTuning
Vendor Classifieds
0
Jun 17, 2015 02:42 PM
ECSTuning
Drivetrain Products
0
Jun 17, 2015 02:41 PM
blunderbird
R56 :: Hatch Talk (2007+)
70
Apr 26, 2013 06:34 PM




All times are GMT -7. The time now is 08:24 PM.