While driving recently, my shifter started flopping all over the place. As it turned out one of the Rod Change shift rubber mounts totally came apart, and the other was on its way. The only thing keeping the shifter in place was the exhaust system, which was holding it up. Here's what it was looking like:





Fortunately overnight shipping and a little bit of squeezing over and under got it back on the road again. Till the next time....

 

Wow, thanks for sharing, great pix!

http://www.minimania.com/Search_Results/shift/Parts

Drive Hard. Drive Safe. Keep Grinning.

 

get some polly ones

 

Do you have a link to the poly bobbins?

 

Sorry these are the only type
http://www.minispares.com/product/Cl...ck%20to%20shop
I thought they were poly

 

keep an eye on the metal around the mount points would seem to be the greater concern!!!!

 

It would probably transmit a bit of NVH, but you could use an appropriate length bolt and poly bushing to replace these......

 

yes thats not the original hole it been cut out wrong hole is too far back what year is your mini