R50/53 2005 MCS Coilover Install = Viabration
2005 MCS Coilover Install = Viabration
Hey guys,
Installed some H&R street coilovers on my R53...took it for a test spin and i'm getting vibration when accelerating. What could this be?
I haven't taken it in my an alignment yet...but i'm not sure if that will fix this anyways.
Any suggestions???
Thanks,
Zubair
Installed some H&R street coilovers on my R53...took it for a test spin and i'm getting vibration when accelerating. What could this be?
I haven't taken it in my an alignment yet...but i'm not sure if that will fix this anyways.
Any suggestions???
Thanks,
Zubair
When I installed my M7 springs I got the same thing. From everything i read it was due to a grove being worn in the CV bearing on the axle. I don't know how true it was but I know when I replace them it went away.
Trending Topics
So do I but after doing a radiator,thermostat, strut mounts, tie rods and coilovers...I just want to drive the bloody car lol
Im just frusterated because I had to deal with both my pinch bolts braking and the hours of drilling it out
Im just frusterated because I had to deal with both my pinch bolts braking and the hours of drilling it out
Ouch :/ I had no problems with my install except the rubbing up front and needing to order spacers. How bad are the vibes? Mine are only in 2nd from 20-30 at the current.
So I put the coilovers up in the front almost as much as the can go and i've got the viabration dialed out except for in 2nd gear, I think I may be able to deal with it as I can't go back to stock now after riding on these lol!
Going to take it in for an alighnment tomorrow as my alighnment is pretty off since I did Tie rod ends as well. Hopefully that will dial out some more of the viabration.
Thanks the the help guys
Going to take it in for an alighnment tomorrow as my alighnment is pretty off since I did Tie rod ends as well. Hopefully that will dial out some more of the viabration.
Thanks the the help guys
So I put the coilovers up in the front almost as much as the can go and i've got the viabration dialed out except for in 2nd gear, I think I may be able to deal with it as I can't go back to stock now after riding on these lol!
Going to take it in for an alighnment tomorrow as my alighnment is pretty off since I did Tie rod ends as well. Hopefully that will dial out some more of the viabration.
Thanks the the help guys
Going to take it in for an alighnment tomorrow as my alighnment is pretty off since I did Tie rod ends as well. Hopefully that will dial out some more of the viabration.
Thanks the the help guys
you have any pics? I'm curios to see how low you are on those.
Thread
Thread Starter
Forum
Replies
Last Post
squawSkiBum
MINI Parts for Sale
15
Oct 2, 2015 09:21 AM



